9mm failure to eject

[Montman]

With 115 grain plated bullets and AA#7, (which is all I use in 9mm, really), I find 7.5 grains gives the best performance. This load works with Berrys and the plated bullets that RMR sells. I highly recommend the Berrys Hollow Base Round Nose Thick Plate, great bullets.

I've loaded up about 150 rounds at 7.0 gr of Accurate #7.
I'll see how these work and try out your suggested 7.5 gr load.
Thanks.

 

[Potatohead]

No, it wasn't me I don't think. I think I weighed a dime based on someone else claim.

GS

My bad

 

[fallout mike]

I had a similar problem sunday with 9mm. Jams and stove pipes with 124gr golden sabre hp with a near max load of w231. Haven't attempted to diagnose it yet bc my test loads of 115gr and 147gr winchester silver tip hp were shooting great with w231 and unique. These were near max loads as well. I've been too busy loading them now.

 

[armoredman]

fallout, what COAL are you using with the GS? I use 1.10 with the 124 grain GS, but never really could find a decent load for them.