A-bolt trigger adjustment

Status
Not open for further replies.
L

lwh723

Member
Joined
Mar 7, 2003
Messages
16
Location
Springville, IA
Hi,

I own a Browning A-Bolt II varmit, and while I love the gun, the trigger is a little heavy; so I was wandering if someone out there could tell me what my options are. Drop in, mechanically adjust, polish, etc?
Thanks,
Luke
 
Been awhile since I messed with mine---but here goes.

You have to remove the floorplate and turn down(clockwise) the tiny screw that is hidden in there---that will decrease the poundage of the trigger pull---No other adjustments by the user should be done.

No aftermarket triggers are available that I'm aware of-----Any other work should be done by a gunsmith.
 
Thanks Omaha,

The screw was there, just as you said. I didn't actually try any adjusting, yet. I didn't have my little screwdrivers handy, and that is a little screw.

-Luke
 
If the screw in question is inside a small coil spring, then the screw doesn't adjust the trigger pull weight. At least, that's the way it is on a Micro-Medalion. Could be different on the A-Bolt, I suppose.
 
Status
Not open for further replies.
Back
Top