Brass Fetcher
Member
Special thanks to Gun Slinger for sponsoring this test.
=========================================
Brass Fetcher Ballistic Testing
Test # CS4
Interior wall test. Light clothing on block (2 layers of 8-ounce denim).
(Nominal 10% concentration)
Cartridge : Hornady 9x19mm 147gr TAP CQ
Block Calibration : 3.4 ± 0.05 inch penetration @ 576 ± 0.5 ft/sec
Block Calibration temperature : 37.0 ± 0.05 Degrees Fahrenheit
Block Core temperature : 38.8 ± 0.05 Degrees Fahrenheit
Bullet Performance:
Impact Velocity : 977 ± 0.5 feet/second
Deepest Penetration Depth : 13.5 ± 0.05 Inch
Maximum Crack Diameter : 1.5 ± 0.05 Inch
Max Crack Diameter Location : 4.8 ± 0.05 Inch
Cavitation Depth : 0.0-10.6 ± 0.05 Inch
Notes:
Weapon - Glock 19, with 4.02" barrel length
Distance - 21.0 feet, muzzle to gelatin impact face
Test site conditions - 67 deg F, 41% relative humidity
Time out of refrigeration prior to shot impact - 6 minutes
Bullet recovered weight - 146.4±0.05gr
Bullet recovered average diameter - 0.499±0.0005"
Bullet recovered length - 0.556±0.0005"
=========================================
Brass Fetcher Ballistic Testing
Test # CS4
Interior wall test. Light clothing on block (2 layers of 8-ounce denim).
(Nominal 10% concentration)
Cartridge : Hornady 9x19mm 147gr TAP CQ
Block Calibration : 3.4 ± 0.05 inch penetration @ 576 ± 0.5 ft/sec
Block Calibration temperature : 37.0 ± 0.05 Degrees Fahrenheit
Block Core temperature : 38.8 ± 0.05 Degrees Fahrenheit
Bullet Performance:
Impact Velocity : 977 ± 0.5 feet/second
Deepest Penetration Depth : 13.5 ± 0.05 Inch
Maximum Crack Diameter : 1.5 ± 0.05 Inch
Max Crack Diameter Location : 4.8 ± 0.05 Inch
Cavitation Depth : 0.0-10.6 ± 0.05 Inch
Notes:
Weapon - Glock 19, with 4.02" barrel length
Distance - 21.0 feet, muzzle to gelatin impact face
Test site conditions - 67 deg F, 41% relative humidity
Time out of refrigeration prior to shot impact - 6 minutes
Bullet recovered weight - 146.4±0.05gr
Bullet recovered average diameter - 0.499±0.0005"
Bullet recovered length - 0.556±0.0005"