Compatibility with Redding Press...?

[Justin Thyme]

Hello yall!
I have slowly been purchasing components for reloading with the heart being a Redding T-7 press.
Academy is going through a nation - wide remodel, and have been marking down Hornady die sets to 70% less. I purchased .380 custom die set for 19.21. Haven't opened it, but recall reading that Hornady had some type of adapter lugs.
Any ideas if it would fit Redding press? If so I'll be checking weekly for future die sets (pistol only).
Thanks in advance

 

[X-Ring]

Hornady dies will fit the T-7 press. You do not need to use Hornady's bushings and they must be bought separately and will not work on the T-7.

 

[SARuger]

All modern presses are 7/8"x14tpi. Pacific set that as the industry standard way back in the early to mid 20th century. With only a few exceptions due to how a press is configured, any modern die will fit any modern press.

The preceding standard was 5/8"x30tpi, much smaller

 

[thomas15]

You will need to buy a shell holder for 380