Door Jamb Shotgun Rack?

Status
Not open for further replies.

talleymonster

Member
Joined
Feb 2, 2007
Messages
48
Location
Las Vegas, Nevada
I saw a picture a while back of a rack/holder for a shotgun. I think the shotgun in the picture was a Mossberg. It was a metal frame that looked like it attached to the hinges of a door jamb. It looked like the gun would "snap" into the rack and possibly lock into it. It would be perfect for a home defense shotgun in the bedroom. I just was wondering if what I saw was somebody's ingenious homebrew, or if it is a commercial product that is sold. I googled it, but I couldn't find anything. I dont know where I saw the picture either.
Does anybody know what I'm talking about?
 
I have been using the Loc-Box for about 3 years with no issue. I suppose you could scratch the gun putting it in and out. I'm just careful and don't remove it all that often. I just unlock it and night and lock it in the morning. Very happy with mine.
 
You know what guys, I realy don't think that is what I saw. But the Loc-Box is a neat idea. NO what I saw was more of a large metal frame that the gun kinda clicked on to. The gunn would sit paralell with the rack. I remembered where I saw it. It was on the Las Vegas Craigslist Page. I searched for it again, but it's not there.
 
The first thing I thought of, although it doesn't mount to a door jamb, was the Knoxx CornerLock™ Gun Safe. Their instructions say several times "Never place a loaded weapon in the CornerLock under any circumstances," so it might not be the best means for holding a shotgun for instant HD use. The Vinyl-Coated Gun Ring (Lock Ring) goes through the trigger guard.

Now, if you have a Mossberg that'll take a Sidewinder™ Conversion Kit, and a place where you can hide the magazine so you can still grab it quickly . . . :scrutiny:
 
Two eye bolts from Home depot, and a long bar padlock work pretty well, if all you are concerned about is security. For the finish of the weapon, I wouldn't recommend it for vertical storage. String it horizontally with the eyebolts around the stock and something supporting the front of the weapon is ok, as long as you put up some foam or other insulation to keep the frearm off of the wall. You may want 2 eyebolts in the front as well, and another lock, if you are worried that someone could pry the weapon off by grabbing the barrel. But it works, and it's probably around 10 bux or so. Extra points for mounting all of this into a frame.

I think it may be betterin the long run to store the weapons where they can breathe. You could get a sock for them, but storing them anywhere where they could get damp and rust becomes a problem. Something to keep in mind. Best bet for security is a real safe. Dehumidifiers, etc, and the safe itself, and it really adds up price wise. Plus, it slows access.

But you do not want to leave the frearm within view. If you are in your house, and you are asleep, and do not wake up, the last thing you would want to see is a burglar standing there with your shotgun pointed at your face. Leaving it uncased and within view and this could easily happen. Plus, he's going to check the places where you might normally store one. In a closet, under the bed, between the matress and boxspring, and your gun will go bye bye faster than you can blink. You have to find someplace that he might not look. But you have to be able to access it quickly. It takes some thought.
 
Thrifty Man's Corner Gun Safe

(attempt at your own risk)

Hardware:
1 heavy gauge eye bolt, ideally 3/8" diameter or larger and at least 3" of threaded bolt
1 gun lock, either cable type or padlock with really long clasp

Tools
Drill
Bit for pilot hole appropriate for size of eye bolt

Instructions:

Place your shotgun on the floor in the corner where you want to store the gun. I've done this in a closet, but any corner should work. Run the cable/lock through the receiver to determine where to mount the eye bolt. Mark the corner where the bolt will go. Drill a pilot hole. Make sure you have drilled into a stud and screw the eye bolt into the pilot hole. Lock the shotgun per manufacturers instructions to the eye bolt.

This should provide a relatively solid solution for securing a pump/semi-auto shotgun.

I don't own any break action shotguns yet, so I can't say if this would work with them or not.
 
When the kids were little, I used to use an old police cruiser locking rack in my shop. It stood vertically by the door, loaded and ready to go locked in the rack. The release button was on the opposite side of the door up high and out of sight. My wife and I, and my buddy who helped me hook it up, were the only ones who knew it was there. Ran it off an ac/dc converter with an old emergency light for a battery back up.
 
wow AK103K, that actually sounds like that could be what I'm talking about. Too bad you don't have a picture. This is going to be one of those things that'll drive me crazy until I can figure it out.:confused:
 
Look at some of the police supply websites, they will most likely have something. I think I saw some in a recent Gall's catalog. Sorry, I dont have a pic, and I recently sold the rack on EBay, so you may check there. I got mine back in the 80's at a local police supply and had it between the seats in my old Land Cruiser.

ETA:
Heres what mine basically looked like. They have gone up quite a bit, I think I paid about $60 for mine.
http://www.galls.com/style.html?assort=general_catalog&style=VP235&cat=2693
17544.jpg
 
Closet Gun Rack

May not be what you are looking for, but looks like it would work for you.
Made by G-Lox.
 

Attachments

  • 334_06420.jpg
    334_06420.jpg
    36.3 KB · Views: 238
I got mine back in the 80's at a local police supply and had it between the seats in my old Land Cruiser.

ETA:
Heres what mine basically looked like.

Hey! Now I know why my police trade-in 870 is all marked up the way it is. I never knew how the cruiser racks held the shotgun. OK, off topic... But thanks for posting that pic. :D
 
Stated above...

"But you do not want to leave the frearm within view. If you are in your house, and you are asleep, and do not wake up, the last thing you would want to see is a burglar standing there with your shotgun pointed at your face. Leaving it uncased and within view and this could easily happen."

Jesus. Common sense I guess but well put.:uhoh:
 
Keep in mind with the cruiser type racks, your not going to be able to use them if your gun has a rear, rifle type sight. The clamp closes around the barrel, just behind the rear of the forearm/pump and across where the sight usually sits. I had to remove my Mossbergs rear sight to use the rack I had.

One advantage to these type racks is, you can keep the gun loaded with an empty chamber, and the gun can not be charged while in the rack, due to the mount blocking the slides rearward movement.
 
The rack is called the "Readyrack"

I designed and built the rack for the Georgia State Patrol. It was designed in 1996 for use at the Atlanta Olympics. It was standard issue in all Georgia State Patrol vehicles. It is installed between the drivers or passengers seat and the center door post. It makes the shotgun easily accessable from outside the vehicle. It can be purchased thru Clyde Armory in Athens Georgia. Phone 706-549-1840. If you need any more information you can call Greg Gillis at 404-316-1050. I retired from the Georgia State Patrol in 2003.
 

If someone could come out with this, but with a rapid access electronic keypad like a pistol-box, it would be the perfect product!

GunVault who makes the popular lock-boxes for pistols had a product like that, but they discontinued it. I'm not sure if it was due to lack of consumer interest or if it was technical issues. It the clamp looked kind of like a "George Foreman Grill" that clamshelled over the action and trigger of Rem 870's and Mossberg 500 series pump shotguns, and had the standard GunVault buttons and finger grooves on top.

Mounted horizontaly above the doorjamb inside a closet would have been perfect. Just reach up, 'beep beep beep beep' and your shotty drops down into your arms.
 
Have you looked at the Life Jacket? I think IIRC, that you can drill holes into it, mount it to the wall, and be able to access it with a key. The good thing is that you can leave the key in the lock, and only take it with you when you go out or something.

If not the life jacket, then there is a similar lock that you can do this for, and mount it virtually anywhere. They are pretty cheap too.
 
GunVault who makes the popular lock-boxes for pistols had a product like that, but they discontinued it. I'm not sure if it was due to lack of consumer interest or if it was technical issues. It the clamp looked kind of like a "George Foreman Grill" that clamshelled over the action and trigger of Rem 870's and Mossberg 500 series pump shotguns, and had the standard GunVault buttons and finger grooves on top.

Hi all. I'm new here, but in reading this thread I remembered this picture I saw earlier somewhere on the net, although it's not mine.
Too bad they don't make them anymore, it looks like a good idea.
 

Attachments

  • DSCN0254.JPG
    DSCN0254.JPG
    104.1 KB · Views: 74
Status
Not open for further replies.
Back
Top