Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Johnson 1941

Discussion in 'Gunsmithing and Repairs' started by GeorgeR, Nov 26, 2006.

Thread Status:
Not open for further replies.
  1. GeorgeR

    GeorgeR Member

    Joined:
    Dec 19, 2005
    Messages:
    231
    Location:
    Boca Raton, FL
    I need to completely disassemble (and reassemble-that's the hard part) a Johnson 1941 semi auto. I have field stripping instructions, but if anyone has knowledge of more complete instructions I sure could use the help.
     
  2. JohnBT

    JohnBT Member

    Joined:
    Dec 26, 2002
    Messages:
    13,232
    Location:
    Richmond, Virginia
  3. GeorgeR

    GeorgeR Member

    Joined:
    Dec 19, 2005
    Messages:
    231
    Location:
    Boca Raton, FL
    Thank you John. I went ahead and bought it although I suspect it won't be any more detailed than what I have. This should be an adventure :)
     
  4. Jim K

    Jim K Member

    Joined:
    Dec 31, 2002
    Messages:
    17,566
    I know my advice will be disregarded, but DON'T. There are several parts in that rifle that can't be easily removed and may be damaged or damage other parts if you try.

    Field strip as needed, but forget full disassembly unless a broken part has to be replaced.

    Jim
     
  5. BEARMAN

    BEARMAN Member

    Joined:
    Feb 24, 2003
    Messages:
    395
    Location:
    CANADA
Thread Status:
Not open for further replies.

Share This Page