Reloder 15

Status
Not open for further replies.

qajaq59

Member
Joined
Dec 7, 2005
Messages
2,375
Location
S. C. Florida
Has anyone a reloading source for using Alliant Reloder 15 powder with a 165 grain .308 bullet. I've gone thru all my manuals and it simply isn't in any of them. And I looked in Alliant's page but couldn't find it there either. Where else might it be?
Thanks in advance.... Qajaq
 
Go back to their website. It's listed as a Sierra 165 gr spitzer. 45.5 grains max IIRC. Took me maybe 30 seconds to find it.
 
There are many loads for .308 bullets and RE 15, but I take it as you are wanting a RE15 load for a rifle chambered for .308 Winchester, here is a load from Aliant for 165gr Sierra Spitzer Federal 210 primer Federal brass OAL2.7" out of a 24" bbl 45.5gr @2,780fps @57,000 psi.

NOTE THIS IS A MAX LOAD AND SHOULD BE REDUCED BY 10% FOR STARTING LOAD!

hope this gets you started
 
Know this isn't for the 165 bullet, but I'm currently using RE 15 in my 40X. Info as follows:

Rifle: 40X Rremington w/ Hart 27" SS 1-10" twist barrel

Case: Federal
Primer: Winchester WLR
Bullet: 168 gr Sierra HPBT Match
Powder: 42.0 gr RE 15

After trying a LOT of powder/primer/case combos, this rifle LOVES that load, and will shoot 32mm 5-shot groups at 300 meters. Smallest 10-shot group was 42mm.
 
I've got the Lee, the Lyman and the Metalic Loading Manual by Anderson, but I haven't got the Sierra. However, you can bet the farm that I'll have it the next time I go over to the reloading store.

And thanks guys, I appreciate the help.
 
Lyman 48th edition

Rem case
Rem 9 1/2 primer
Bullet Nosler 165
Bullet Sierra HPBT 168
Univeersal receiver
Barrel length 24”
R15 Powder (Suggested starting load 41 gr.) (pressure 34,800) (Suggested Max load to 44.5 grains)(pressure 47,900)
2.780 OAL
 
Status
Not open for further replies.
Back
Top