i have a ruger with a 22 win mag cylinder. 22 win is kind of expensive and i would like to get a 22 LR cylinder. does anyone know of any problems, will it work with this gun and where to get one? oh and can i shoot 22LR with this cylinder? any help would be great!
ruger new model single six cylinder
- Thread starter ou812bob
- Start date
- Status
Brian Williams
Moderator Emeritus
Ruger requires that you send it for fitting if you get a new cylinder from them and NO, you should not fire 22lr in a Mag cylinder.
Some folks have gotten a cylinder from Gunbroker or Auction Arms and it worked, they were lucky.
Some folks have gotten a cylinder from Gunbroker or Auction Arms and it worked, they were lucky.
ou812bob;
Just to expand on Brian's post. He's entirely correct when he said that the folks who have aquired an extra cylinder & just put it in & used it were lucky. If the cylinder isn't properly timed with the pawl & cylinder lock-up, the bore of the cylinder will not be concentric with the barrel. Minor variations can be accomodated by the forcing cone in the barrel, but accuracy will almost certainly suffer. Larger variations will cause lead shaving. It would be extremely unusual, but a gross variation would allow the fired bullet to impact the edge of the barrel to the point that you'd have an adventure you didn't want to have.
900F
Just to expand on Brian's post. He's entirely correct when he said that the folks who have aquired an extra cylinder & just put it in & used it were lucky. If the cylinder isn't properly timed with the pawl & cylinder lock-up, the bore of the cylinder will not be concentric with the barrel. Minor variations can be accomodated by the forcing cone in the barrel, but accuracy will almost certainly suffer. Larger variations will cause lead shaving. It would be extremely unusual, but a gross variation would allow the fired bullet to impact the edge of the barrel to the point that you'd have an adventure you didn't want to have.
900F
- Status