Where are reloading components available (Not a Discussion Thread)

Lennyjoe · Apr 9, 2013

Wholly moly, just got an email from Cheaper than Dirt and they have Aguila 22LR ammo in. 500 rounds for a whopping $79.59......Ouch!

Walkalong · Apr 9, 2013

Respond and let them know, politely, what you think of the price and why you cannot buy at that price.

Belmont148 · Apr 9, 2013

My local Sportsmans Warehouse still had TAC on the shelf today along with some decent IMR powders. Due to availability my go to rifle powders are now IMR4895, H4895, and TAC. I was previously using Varget and CFE 223 but who knows when that stuff will pop up again.

nix4me · Apr 9, 2013

Lennyjoe said:
Wholly moly, just got an email from Cheaper than Dirt and they have Aguila 22LR ammo in. 500 rounds for a whopping $79.59......Ouch!

I hope it rots on their shelves. Thats insane, yet someone will panic and buy it.

firefighter_emt · Apr 9, 2013

If anyone is looking for a Lee 4 hole classic turret press kit, they have some in stock at midwayusa.com . This is a slightly different kit than you find everywhere else but it has everything you need except the auto-disk powder measure riser. $219

LiveLife · Apr 9, 2013

= A REQUEST PLEASE =

Being a Californian (and a future non-Californian), I understand why some would have emotional feelings about CTD but the primary objective of this thread is help locating available reloading components and equipment for those who need them. So I politely ask that you shift your frustration/rant posts about CTD to other threads. Thank you.

I try to post available items "in stock" that are reasonably priced but sometimes have to post higher priced items simply because there is nothing else available.

Many may complain about $80/500 for .22LR sold by CTD, but if you check on GunBroker, $80/500 is not an unreasonable price and right now on GunBot the lowest priced .22LR ammo is priced at $139/500 (Yes, really) - http://www.gunbot.net/ammo/22lr/

On a short timeline, I tried to locate reloading equipment/components for 380Auto/9mm/45ACP for two ladies I am helping set up and while I was able to purchase single and progressive presses, bullets, brass (Thanks Walkalong!) and 9mm/45ACP dies at reasonable prices, I was not able to find 380Auto dies and ended up spending $50+ on ebay. I never thought I ever pay $50 for a set of Lee dies but strange times we live in and the current shortage trends may be the "new normal" for the forseeable future. :uhoh:

OK, back to helping others locate reloading components and equipment!

LiveLife · Apr 9, 2013

Here's another reality we may be facing (or already facing).

Some vendors accept "Backorders" which get filled when they receive new deliveries.

If the "Backorders" increase significantly in number, even though substantial amount of new inventories of stock are received by the vendors, they may not change any items to "In stock" until all the backorders are filled and there are items leftover.

But backordering reloading components that require HazMat fees create another problem. If you backorder two items that require HazMat fees and the backorders are not filled/shipped at the same time, you will be charged TWO separate HazMat fees.

LiveLife · Apr 9, 2013

Checked the vendors on the thread - not much significant changes except for more sold items. Hopefully situation improves.

Check posts #148, #157, #188, #189, #194, #202, #203, #217, #218, #219, #225, #227, #228, #237 and #249 for available reloading components.

LiveLife · Apr 10, 2013

Ryano · Apr 10, 2013

New Cabela's grand opening tomorrow in Louisville. I have a buddy who got an invite to a pre-opening event today. Says they are fully stocked with powders, primers, dies, etc. I'm sure it won't last long. 5 box limit on ammo.

TexasShooter59 · Apr 10, 2013

bds said:
Here's another reality we may be facing (or already facing).

Some vendors accept "Backorders" which get filled when they receive new deliveries.

If the "Backorders" increase significantly in number, even though substantial amount of new inventories of stock are received by the vendors, they may not change any items to "In stock" until all the backorders are filled and there are items leftover.

But backordering reloading components that require HazMat fees create another problem. If you backorder two items that require HazMat fees and the backorders are not filled/shipped at the same time, you will be charged TWO separate HazMat fees.

I have thought this might be happening, and will do a backorder on certain items. I have seen where some items will be out of stock and then be available for a brief amount of time. I figure if I put in a backorder, I might get the item when it shows up briefly.

Belmont148 · Apr 10, 2013

Local Sportsmans got in a ton of stuff today

CFE 223
BLC 2
HP 38
VV N320

224 v max bullets
Berrys in 9mm , 45, and 40
Lots of other bullets

They also got all types of Remington primers and a ton of ammo. Remington mostly came in today. 250 pistol boxes and 50 223 boxes. Good sighns!

angus6 · Apr 10, 2013

Wideners has 5000pc box of ss109's

mtrmn · Apr 10, 2013

angus6 said:
Wideners has 5000pc box of ss109's

Here's a link to make it easier:

http://www.wideners.com/itemdetail.cfm?item_id=7237&dir=278|281|1081|1141

LiveLife · Apr 10, 2013

LiveLife · Apr 11, 2013

PowerBond Plated Bullets (Shipping is $3.00 per each box of 500 bullets):

NOTE: To order, click on "Confirm" box, click on "Order These Bullets", click on "CHECK BASKET CONTENTS" at the top then "CHECK OUT"

38 HP 125 gr $54 / 500 - http://www.powerbondbullets.com/mm5...Code=PBOS&Product_Code=38HP125&Category_Code=

38 HP 158 gr $60 / 500 - http://www.powerbondbullets.com/mm5...Code=PBOS&Product_Code=38HP158&Category_Code=

40 FP 165 gr $65 / 500 - http://www.powerbondbullets.com/mm5...Code=PBOS&Product_Code=40FP165&Category_Code=

44 FP 240 gr $71 / 500 - http://www.powerbondbullets.com/mm5...Code=PBOS&Product_Code=44FP240&Category_Code=

45 RN 200 gr $67 / 500 - http://www.powerbondbullets.com/mm5...Code=PBOS&Product_Code=45RN200&Category_Code=

1SOW · Apr 11, 2013

Sure would like to see some .22LR pistol ammo and 9mm bullets come up in the lists. :uhoh:

LiveLife · Apr 11, 2013

Well, .22LR ammo are available. You just have to be willing to pay for them - http://www.gunbot.net/ammo/22lr/

Wow, I still can't believe the prices ... $139/500 for .22LR! :barf:

And 9mm?

$33.75/50 for 115 gr FMJ BVAC (Remanufactured) - http://www.bulkammo.com/bulk-9mm-ammo-9mm115grfmjbv92bvac-50

$34.50/50 for 115 gr FMJ Tula - http://www.bulkammo.com/bulk-9mm-ammo-9mm115fmjtulablack-50

$665/1000 for 115 gr FMJ Tula - http://www.bulkammo.com/bulk-9mm-ammo-9mm115fmjtulablack-1000

LiveLife · Apr 11, 2013

Natchez Shooters Supplies has Bullseye powder!

Bullseye - $16.49 / 1 lb and $113 / 8 lbs

Other powders in stock - http://www.natchezss.com/category.cfm?category=6&outOfStock=0&orderBy=

- American Select 1/4/8 lbs
- Blue Dot 1/5 lbs
- Promo 8 lbs

Lee Breech Lock Challenger press ($60) - http://www.natchezss.com/Category.c...88&prodTitle=Lee Breech Lock Challenger Press

Lee Classic Cast Breech Lock ($94) - http://www.natchezss.com/Category.c...E90999&prodTitle=Lee Classic Cast Breech Lock

Lee Classic Turret kit ($186) - http://www.natchezss.com/Category.c...E90304&prodTitle=Lee Classic Turret Press Kit]

Lee Load Master kit for .223 ($224) - http://www.natchezss.com/Category.c...90922&prodTitle=Lee Load Master 223 Remington

Lee Load Master press ($144) - http://www.natchezss.com/Category.c...ee Load Master Progressive Press - Press Only

LiveLife · Apr 11, 2013

WOW! Bullseye 8 lbs sold out already!

1 lb containers still available ... wow.

1SOW · Apr 11, 2013

Well, .22LR ammo are available. You just have to be willing to pay for them - http://www.gunbot.net/ammo/22lr/

Wow, I still can't believe the prices ... $139/500 for .22LR!

I'm sometimes a little nutty, but I'm NOT totally insane----yet.
The really insane thing is, they'll probably sell at those prices.

I'll pump up the pellet guns , before I'll pay that.

LiveLife · Apr 11, 2013

LiveLife · Apr 11, 2013

TheSaint · Apr 11, 2013

LEE 4 #90963 40.86
Lee Deluxe Pistol Carbide 4-Die Set w/Shellholder For 9MM Luger

http://personalchoiceoutfitters.com/dies/lee-deluxe-4-die-pistol-sets-90963.php?id=8233

Free shipping to boot. I've seen these dies go for $60 on other sites plus shipping. I just ordered one and they are still showing in stock.

ole farmerbuck · Apr 11, 2013

I was going to get 5lbs of powder from Natches but $50.52 shipping? I must live in a bad area.

Where are reloading components available (Not a Discussion Thread)

Member

Moderator

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Similar threads