Search results for query: *

I would buy the Oracle upper in a heart beat. I own one and it shoots great! I have several handloads ranging from 52 gr hp's to the 70 gr VLDs. All shoot ragged 1 hole groups at 100 yards. As for hunting this year alone it has taken 2 deer and 3 hogs. All with 60 gr Nosler Ballistic tips...

280shooter, So far this year the coldest temps I have seen have been 25 degrees. It seemed to work just fine. 788 Ham, The hogs here are like clock work... Every evening no matter what blind I am in they will show up between 5:46m and 5:54pm. A few weekends ago I shot 3 in one evening...

I believe the brand is Moultrie Google "Moultrie Game Spy® M-80 Game Camera." That should get you where you need to be ;) Best of Luck

Moultrie Game Spy® M-80 Game Camera I have had great luck with this camera. Attached a few day/night pictures.

23 with a lot to learn.

North Texas Buck No Luck yet Pulled this from my game camera this weekend. :D

After alot of experimenting I have found loads that shoot great in my 16" 1/9 twist. Plinking Load: Bullet: 55gr Nosler Ballistic Tips Powder: 25.0 grs of H335 Primer: CCI .41 OAL: 2.255" Longer Range Load: Bullet: 70 gr Berger VLD Powder: 25.4 grs of RE-15 Primer: CCI .41 OAL...

+ 1 to Mtrmn: Great Advise and good information. Subsonic loads present more issues than they solve and offer very little practical use. I have a CMMG conversion kit for my AR that shoots 22 lr (appx. $150). When shooting 60gr sss 22 lrs with my suppressor its very quiet! About as close to...

+ 1 on MistWolf's comment My grandfather has encouraged me to keep all the guns I've purchased. He has many horror stories of selling guns when he was low on cash just to go back out and buy them. :banghead: I would keep the .270 (great caliber) then look into buying a new .22 cal. A 223/5.56...

Luckily, I do have a good .25 cal brass jag and plenty of patches. I may have a .243 bronze brush laying around. When it comes to the scrubbing process, should each pass be a complete pass from chamber to muzzle? Or do you scrub back and forth? Im slowly realizing that I have alot to...

:banghead: Good point RC. I'll skip the range stuff (save time and money) and wait for this stuff to come in. I have read when using the J-B's put some on a patch scrub about 25 passes then add more to a new patch and continue until satisfied or exhausted... Does that sound about...

Rc, After reading all the horror stories of hand lapping I was trying to avoid that avenue, but this method seems much less abrasive. I should be able to do that without causing too much damage. I'll put in an order and start there as lapping was also my dads first suggestion. (He did mention...

Over the summer I ordered my 10" Rogue Hunter and paid right around $1650. I have noticed Noveske is now selling a Gen II lower which does add to the cost... (I think) In the end, great rifles and worth the money. Mine should be here end of Dec. or early Jan. Does anyone else hate how...

Im not familiar with Microlon Gun Juice, where can I find it? This is a new barrel so I'll give it a try. As for Wipe Out, I have heard alot of people switching to it. I'll be sure to pick up a can at Cabelas (if they have it).

41 Mag, Thanks for the tips on the Hornady's and RL powder. The new Nosler manual list RL 19 as "the most accurate powder tested" with multiple bullet weights. I think I may pick up some Hornady 117s and some RL 19 on my next trip to Cabelas. Luckily its about 10 minutes from the house ;)

Today on my lunch break I plan to shoot factory 100gr rounds that I had sitting on the shelf. I plan to shoot 10 rounds cleaning between each shot and removing any copper. Im hoping the factory loads will be slightly slower and help "smooth" any rough spots as long as I thoroughly remove the...

When I start loading test rounds with bullet/powder combinations, what powder increments should I use? I plan to load 5 rounds at each powder weight working up to max. So for example, if max is 50.0 should I load sets at 48.5, 49.0, 49.5 then 50.0? Or is there a better approach? With...

Thanks again RC, I'll keep experimenting with lighter bullets and a few other powders. If that doesnt change my luck I will mess around with the barrel shims. I will admit I am having a hard time wrapping my head around that idea. Only because from day one I have been told how bad it is to...

NC, When using the Tubbs I made sure I removed all copper prior to starting and between each 5 shot string (as directed). I will try the lighter bullets to see what happens... Thank you

King, It is a Marlin XL7 (which means this may be the most accuracy I can squeeze out of it). As to my shooting, I have loads that shoot .214" one hole groups out of my AR15 @ 50yds (see attached). I use a Harris bipod and use a formed sandbag in the rear. RC, I was hoping you would...