Charley345
Member
The attached picture shows two reloads that the bullet moved out while in the magazine when firing previous rounds. They were long enough that the slide did not go fully forward to lock up. Out of three mags this happened two times. Once on the second round of the mag, once on the third round of the mag. All other rounds fired normally. I still have about 200 rounds of these left.
Can I add a tiny amount of crimp to hold these tighter? They measure .471 to .4715 diameter now. Shooting from HK45c, no limp wristing going on here.
Can I add a tiny amount of crimp to hold these tighter? They measure .471 to .4715 diameter now. Shooting from HK45c, no limp wristing going on here.