Carbide cutter for Dillon RT1200

[sevt_chevelle]

Looking for a carbide cutter that is wider then the standard dillon cutter. Bought a milled toolhead and a CH4D 30 carbine dillon trim die now I can trim 30 carbine brass with the 1200 on my 650. Works so great I bought a 44 mag Dillon trim die and the cutter is too small to trim the brass, so am looking for a cutter insert big enough to trim 44 mag.



Thanks for any help.

 

[jmorris]

You will either need to modify the shaft where the cutter seats or have cutom carbide cutters made. The first idea is the better of the two because you would still be able to index.

If you could go with a larger over all cutter that would also work.

 

[Blue68f100]

Go to McMaster-Carr and see what they have. They have cutters with smaller shafts.