I just setup my new Lyman Turret Press that I got for Christmas -- I have Dillon 40 S&W Carbide dies. According to the Lee Reloading Data for 40S&W using 155 lead bullets, the minimum length is 1.125" and the OAL is 1.135", so I adjusted my seating die for 1.130".
However, every few cartridges would produce either over the OAL (sometimes even 1.140" or even under the min length (sometimes about 1.120), which is quite odd.
Being fairly new to reloading, what sort of variations do you experience with your OAL with finished rounds and should I be concerned?
Thanks,
Richard
However, every few cartridges would produce either over the OAL (sometimes even 1.140" or even under the min length (sometimes about 1.120), which is quite odd.
Being fairly new to reloading, what sort of variations do you experience with your OAL with finished rounds and should I be concerned?
Thanks,
Richard