CZ57
member
Alliant makes the claim in their load guide, and I believe the statement Ramshot makes is an indicator of perfromance and not a claim that it is used by our military. But, it should be! Silhouette is treated to keep flash as low as you're likely to get. It's a spherical powder that meters better and the performance potential is about as good as it gets and IS used by guys loading 9mm Major. Power Pistol doesn't quite get there. It's been a few years, but I learned that Cor-Bon uses AA#7 in their +P loads, though Alliant claimed it was Power Pistol. It's easy to understand why Cor-Bon would use #7. At the velocity they achieve flash is very low and if you try that with PP and fire at night, you'll think you're shooting a mini flamethrower. Not good for the troops, but what else is new? Supposedly, the military version has a flash inhibitor. The last thing you want is an inconsistent powder charge and it is extruded flake, anyway.
Another tidbit: Power Pistol is a larger flake variant of Bullseye. This is done to slow the burn rate.
AA#7, V-V 3N37, HS-6 and Silhouette are the best choices available for hi performance 9mm. Yes, I have and use them all! You can use 231 and others (a tiny bit faster, and those slower to around Unique/Universal) to get close, or to 9mm Nato spec, but they will be at max pressure whereas #7, 3N37, N-350, HS-6 and Silhouette are just getting warmed up. WSF is a contender here also, but data above NATO performance is not commonly available except with the IPSC guys over at Brian Enos' Forum, and that's pretty much the case with most of them unless you have a manual that used the former pressure limit of 35,700 CUP that is very close to the current +P max of 38,500 PSI. Most quality made 9mm pistols are designed for the former spec, but they may be undersprung to conform to current SAAMI spec ammo that has a pressure max of 35,000 PSI/ 33,000 CUP. Longshot will also get you there, but is very loud at max pressure.
Silhouette (Formerly WAP), in my oppinion, was Primex's attempt to produce a competitive powder to 3N37 and the base chemistry is similar to two of Primex's (Hodgdon & Winchester) other powders: WSF and HS-6. At max charges, Silhouette loads will run .1 or .2 grains lighter than 3N37. A visual inspection of the two powders, Silhouette and 3N37, will sure make you wonder!
Those that I have recommended are all Ball-type powders that meter well, but nothing meters better than AA#7. It has the highest bulk density of any handgun powder available to handloaders at 985 grams/liter. One advantage #7 has is that it will push 147 gr. JHPs to the highest velocity. You won't see this with 9mm Major competitors because they prefer bullet weights of 115 and 124 grains to maximize the effectiveness of compensators on their pistols. A very honorable mention goes to Vectan SP-2, if you can find it. There is no current US importer. SP-8 is a very good powder and like AA#7, it was designed for 9mm. Data is extremely weak and hard to come by.
I currently have 4 lbs of Silhouette (a little less now) and will be working it out in 9mm and the .40 S&W, where it has already shown great potential. If interested, shoot me a PM in the future. 3N37, HS-6 and #7 are already proven. #7 is Accurate, and has very low flash with 124 gr. JHPs. HS-6 is pretty much the 9mm performance powder that all others are judged by. Blue Dot will give you even higher velocity than PP, but flamethrower flash is a characteristic it shares with PP. This will be common with any extruded flake propellant at high pressure. 800-X is a powder I never use. I don't recommend using a powder that is difficult to meter when you are working towards the pressure max of a cartridge.
Along with Silhouette, I'll be using the Montana Gold (Brass Jacketed) 124 gr. JHP, CCI-500 and Win. cases loaded to 28.5mm/ 1.122".
Another tidbit: Power Pistol is a larger flake variant of Bullseye. This is done to slow the burn rate.
AA#7, V-V 3N37, HS-6 and Silhouette are the best choices available for hi performance 9mm. Yes, I have and use them all! You can use 231 and others (a tiny bit faster, and those slower to around Unique/Universal) to get close, or to 9mm Nato spec, but they will be at max pressure whereas #7, 3N37, N-350, HS-6 and Silhouette are just getting warmed up. WSF is a contender here also, but data above NATO performance is not commonly available except with the IPSC guys over at Brian Enos' Forum, and that's pretty much the case with most of them unless you have a manual that used the former pressure limit of 35,700 CUP that is very close to the current +P max of 38,500 PSI. Most quality made 9mm pistols are designed for the former spec, but they may be undersprung to conform to current SAAMI spec ammo that has a pressure max of 35,000 PSI/ 33,000 CUP. Longshot will also get you there, but is very loud at max pressure.
Silhouette (Formerly WAP), in my oppinion, was Primex's attempt to produce a competitive powder to 3N37 and the base chemistry is similar to two of Primex's (Hodgdon & Winchester) other powders: WSF and HS-6. At max charges, Silhouette loads will run .1 or .2 grains lighter than 3N37. A visual inspection of the two powders, Silhouette and 3N37, will sure make you wonder!
Those that I have recommended are all Ball-type powders that meter well, but nothing meters better than AA#7. It has the highest bulk density of any handgun powder available to handloaders at 985 grams/liter. One advantage #7 has is that it will push 147 gr. JHPs to the highest velocity. You won't see this with 9mm Major competitors because they prefer bullet weights of 115 and 124 grains to maximize the effectiveness of compensators on their pistols. A very honorable mention goes to Vectan SP-2, if you can find it. There is no current US importer. SP-8 is a very good powder and like AA#7, it was designed for 9mm. Data is extremely weak and hard to come by.
I currently have 4 lbs of Silhouette (a little less now) and will be working it out in 9mm and the .40 S&W, where it has already shown great potential. If interested, shoot me a PM in the future. 3N37, HS-6 and #7 are already proven. #7 is Accurate, and has very low flash with 124 gr. JHPs. HS-6 is pretty much the 9mm performance powder that all others are judged by. Blue Dot will give you even higher velocity than PP, but flamethrower flash is a characteristic it shares with PP. This will be common with any extruded flake propellant at high pressure. 800-X is a powder I never use. I don't recommend using a powder that is difficult to meter when you are working towards the pressure max of a cartridge.
Along with Silhouette, I'll be using the Montana Gold (Brass Jacketed) 124 gr. JHP, CCI-500 and Win. cases loaded to 28.5mm/ 1.122".