kfrancis2001
Member
- Joined
- Jun 7, 2006
- Messages
- 25
What is the going price for a basic cleaning on the different types of guns? Ballpark figures?
Cleaning
- Thread starter kfrancis2001
- Start date
- Status
Editorial Comment...
The cost of a toothbrush, some Simple Green, FP-10 and a "Bore Snake" (a pull-through the bore cleaning aid) in the proper caliber(s) should get you started. You really need to have your own set of cleaning supplies and NOT rely on others to clean your "tools." If you're presently not familiar with the more in-depth cleaning procedures, there are plenty of how-to's on the web.
But try to spend $30 or so on the basics and you'll be far more comfortable with your own stuff - including the knowledge of now being familiar with the rudimentary disassembly, cleaning, lubrication and reassembly of your arms. (Caveat - just be careful of bouncing springs!
)
I would also suggest a can of PowderBlast, a cookie-sheet with paper towels, a small plastic Rubbermaid tub as a catch-all and a couple ice cube bins for rinsing purposes. Not too sophisticated but they are worth the few additional $$'s. Clean the Bore-Snake with the Simple Green under the faucet when you're done and hang to dry - ready for re-use.
The cost of a toothbrush, some Simple Green, FP-10 and a "Bore Snake" (a pull-through the bore cleaning aid) in the proper caliber(s) should get you started. You really need to have your own set of cleaning supplies and NOT rely on others to clean your "tools." If you're presently not familiar with the more in-depth cleaning procedures, there are plenty of how-to's on the web.
But try to spend $30 or so on the basics and you'll be far more comfortable with your own stuff - including the knowledge of now being familiar with the rudimentary disassembly, cleaning, lubrication and reassembly of your arms. (Caveat - just be careful of bouncing springs!
)I would also suggest a can of PowderBlast, a cookie-sheet with paper towels, a small plastic Rubbermaid tub as a catch-all and a couple ice cube bins for rinsing purposes. Not too sophisticated but they are worth the few additional $$'s. Clean the Bore-Snake with the Simple Green under the faucet when you're done and hang to dry - ready for re-use.
JohnBT
Member
I have no idea, so I resorted to google. This quote is from some gun range in the 405 area code.
"Besides the regular gun cleaning I do, should I have my gun cleaned by the Gunsmith?
Yes, a yearly deep clean is the best method of maintaining the quality life and value of your firearm. The number one cause of malfunctions is dirt. The Gunsmith department will tend to all the small details and make sure that problems of rusting and buildup are cleared away. Every firearm should have a yearly checkup and cleaning.
PROJECTED COST (Deep cleaning $45.00 & regular clean $ 35.00)
PROJECTED TURNAROUND TIME 1 -2 Days Up To One Week"
"Besides the regular gun cleaning I do, should I have my gun cleaned by the Gunsmith?
Yes, a yearly deep clean is the best method of maintaining the quality life and value of your firearm. The number one cause of malfunctions is dirt. The Gunsmith department will tend to all the small details and make sure that problems of rusting and buildup are cleared away. Every firearm should have a yearly checkup and cleaning.
PROJECTED COST (Deep cleaning $45.00 & regular clean $ 35.00)
PROJECTED TURNAROUND TIME 1 -2 Days Up To One Week"
There you go... see how much you can save?!
But if you don't have hollow-ground screwdrivers and/or the willingness to do a thorough check-up on your own, then leave the initial process to the gunsmith if that makes you feel more comfortable. He/she won't be likely to ruin it during the tear-down or cleaning that well-intentioned amateurs may end up doing - especially on something that might have considerable real or personal value.
But I reiterate the need for you to have the essentials in hand and to use them properly. That will do more to preserve your arms in an operable state than an annual checkup which you should be doing irregardless of any other maintenance (or lack thereof). Be sure you know how to field-strip the arm and if not, also have the 'smith show you how it's done.
Frequent careless or inappropriate cleaning can also be detrimental - so knowledge is the best tool of all...
Good luck!
But if you don't have hollow-ground screwdrivers and/or the willingness to do a thorough check-up on your own, then leave the initial process to the gunsmith if that makes you feel more comfortable. He/she won't be likely to ruin it during the tear-down or cleaning that well-intentioned amateurs may end up doing - especially on something that might have considerable real or personal value.
But I reiterate the need for you to have the essentials in hand and to use them properly. That will do more to preserve your arms in an operable state than an annual checkup which you should be doing irregardless of any other maintenance (or lack thereof). Be sure you know how to field-strip the arm and if not, also have the 'smith show you how it's done.
Frequent careless or inappropriate cleaning can also be detrimental - so knowledge is the best tool of all...
Good luck!
kfrancis2001
Member
- Joined
- Jun 7, 2006
- Messages
- 25
I think there is a misunderstanding. I'm the one doing the cleaning. I just don't want to under or over charge people for a basic cleaning.
Thanks for the info on cleaning the bore snake that was goin to be my next question.
Thanks for the info on cleaning the bore snake that was goin to be my next question.
- Status
