ahandgunner2
Member
I bought a pre-war Woodsman as a shooter - pitted/worn. It shot well when I first took it out but trigger wouldn't return.....so I finally found trigger return spring and fixed it. Cleaned everything while it was apart and even Duracoated frame and slide (it had no bluing left).
Upon re-assembly the trgigger/trigger bar won't release the sear and drop the hammer. Can't see any noticable wear on the sear or trigger bar and am at a loss for what to do. Anyone ever see this on a woodsman?
When I watch it, it doesn't even look like complete trigger pull even moves the sear...just comes up and touches it.
Open for ideas....I measured the release part of the trigger bar at 0.117" wide but it doesn't look worn. Anyone know what a good one measures?
Upon re-assembly the trgigger/trigger bar won't release the sear and drop the hammer. Can't see any noticable wear on the sear or trigger bar and am at a loss for what to do. Anyone ever see this on a woodsman?
When I watch it, it doesn't even look like complete trigger pull even moves the sear...just comes up and touches it.
Open for ideas....I measured the release part of the trigger bar at 0.117" wide but it doesn't look worn. Anyone know what a good one measures?