Help! I need a CZ75 Compact holster.
- Thread starter Seven©
- Start date
- Status
I ordered a Bianchi Black Widow belt slide holster from Cheaper than Dirt last week, it should arrive tomorrow. It looks like what you are describing, costs $39, looks good. It is described as being for the CZ-75, but since it is open-ended it will work for both.
Dr. Tad Hussein Winslow
member
- Joined
- Nov 14, 2007
- Messages
- 13,146
I have (and LOVE) the Gould & Goodrich "Yaqui Paddle" holster, made specifically for the 75 compact & compact PCR (which incidentally has different dimensions in the dust cover area than a full-sized 75). It's this one:
http://www.gouldusa.com/products/pr...ine+Concealment+Holsters,+Belts+&+Accessories
BUT - but, right now that website does not show that it's offered for ANY CZ pistols, for some reason - I would call them and see if they have any lying around for the 75 compact, if the situation is that they discontinued for this model. Highly recommended if you can locate one.
Ooooo, just noticed that - as I said, different dimensions - for some reason the 75 compact is quite a bit thicker in the dust cover part of the frame than the full sized 75, so likely it will NOT fit (not if it's a well-molded holster, it won't). Sorry NG VI, to burst your bubble - maybe you can return it? Or maybe you have a 75 to carry in it?
Well, you said open-ended - hmmmm....if you can squeeze the dust cover *through* the holster to where it's out and hanging in air, then it might work (i.e. if it's a yaqui style where only the trigger guard is "grabbed" by the holster. If all or even just the rear of th dust cover is grabbed, you'll be out of luck). Hopefully it will work - please let us know.
P.S. Gould & Goodrich also has the 'standard' Paddle holster, fully enclosing the gun, in addition to the Yaqui, in 2 submodels and 2 colors:
http://www.gouldusa.com/products/pr...ine+Concealment+Holsters,+Belts+&+Accessories
Standard and "Comfort" in brown or black. The comfort is described as being:
But once again, not showing as available for any CZs.
http://www.gouldusa.com/products/pr...ine+Concealment+Holsters,+Belts+&+Accessories
BUT - but, right now that website does not show that it's offered for ANY CZ pistols, for some reason - I would call them and see if they have any lying around for the 75 compact, if the situation is that they discontinued for this model. Highly recommended if you can locate one.
Ooooo, just noticed that - as I said, different dimensions - for some reason the 75 compact is quite a bit thicker in the dust cover part of the frame than the full sized 75, so likely it will NOT fit (not if it's a well-molded holster, it won't). Sorry NG VI, to burst your bubble - maybe you can return it? Or maybe you have a 75 to carry in it?
Well, you said open-ended - hmmmm....if you can squeeze the dust cover *through* the holster to where it's out and hanging in air, then it might work (i.e. if it's a yaqui style where only the trigger guard is "grabbed" by the holster. If all or even just the rear of th dust cover is grabbed, you'll be out of luck). Hopefully it will work - please let us know.P.S. Gould & Goodrich also has the 'standard' Paddle holster, fully enclosing the gun, in addition to the Yaqui, in 2 submodels and 2 colors:
http://www.gouldusa.com/products/pr...ine+Concealment+Holsters,+Belts+&+Accessories
Standard and "Comfort" in brown or black. The comfort is described as being:
But once again, not showing as available for any CZs.
PCR is wider you say! Well how much lighter is a PCR compared to a Compact? I mean felt, noticed weight. I will go check specs now, but if the Compact is not noticably heavier then maybe it would be best for me to get an all steel compact instead. that way when I eventually have a fullsize 75 or 85 I will have some even more cross compatible holsters.
Just looked at the CZ-USA site, and the PCR is definitely lighter by an appreciable amount. Width is the same, but for some reason the PCR is listed as being 5.3 inches tall versus the 5 inch tall Compact. Is that true or just a case of slightly incomplete information on the site?
Just looked at the CZ-USA site, and the PCR is definitely lighter by an appreciable amount. Width is the same, but for some reason the PCR is listed as being 5.3 inches tall versus the 5 inch tall Compact. Is that true or just a case of slightly incomplete information on the site?
Last edited:
Eric of HBE Leatherworks does a lot of custom holster work for CZs.
I've bought from him before and will again if I get a CZ this year.
I've bought from him before and will again if I get a CZ this year.
Over all width is measured at the grip on the CZs, which is the same on all. The PCRs frame is wider by I believe .100, which makes it not fit custom holsters. Milt Sparks makes holsters for the CZ75 compact, CZ75 fullsize, and P01.... But not the PCR. The PCR I believe has the Rubber mag base, like the P01, and gives it a taller height spec.
CZF
Member
- Joined
- Jan 6, 2003
- Messages
- 2,034
High Noon Holsters for your CZ needs, but few thumbreak holsters.
The decocker guns rest at half cock, thus a thumbreak is hard to get snapped.
Anyhowz:
http://www.angelfire.com/id/projectsafestarsap/HighNoon.html
The decocker guns rest at half cock, thus a thumbreak is hard to get snapped.
Anyhowz:
http://www.angelfire.com/id/projectsafestarsap/HighNoon.html
The Lone Haranguer
Member
Pilot said:
Agreed. I do the same. However, the OP wants to carry a compact model cocked and locked. I am unsure if the thumbbreak strap would be able to pass between the cocked hammer and the slide, or if it would go over the cocked hammer. It is possible it might need some trimming.
bikerdoc
Moderator In Memoriam
JPB #217 fits my 75 Compact , its all leather with a thumb break retention i think i paid 49.00 new
- Status