bigger jon
Member
Hi all, I just picked up a 94 Winchester in 32 W.S. I don`t have a thing to load for it I need everything Brass, Dies, Bullets. any help would be great..
HELP!!WTB 32 Winchester Special everything
- Thread starter bigger jon
- Start date
- Status
scout26
Member
http://www.chuckhawks.com/32spec.htm
You can fireform .30-30 brass into .32WS with 10 grains of Unique some TP, corn meal, and more TP. My kids call them "Dad's Flaming Toliet Paper Rounds."
You can get a Lee Loader in .32WS for $10-$20 either on evil-bay or at a gun show or you can get dies for around $20-$30 if you already have a press. http://cgi.ebay.com/LEE-LOADER-32-W...ryZ31825QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Bullets are a little harder. You need to find 170 grain .321 dia Flat Point or Flat Nose since these are going into a tube magazine. Crimping is a must to avoid set-back. Speer and Hornady make them. http://www.midwayusa.com/ebrowse.ex...020&categorystring=9315***652***675***9016***
You can also get lead bullets from Gardner's Cache http://gardnerscache.com/32win_spl_170_lfp_g_c.html
I've also got a Win 94 in .32 WS that I load for. I use a Lee Loader, IMR 3031 or 4198, Remington 9 1/2 or CCI Rifle primers (NOT Magnum).
PM or e-mail me, if you have any other questions.
You can fireform .30-30 brass into .32WS with 10 grains of Unique some TP, corn meal, and more TP. My kids call them "Dad's Flaming Toliet Paper Rounds."
You can get a Lee Loader in .32WS for $10-$20 either on evil-bay or at a gun show or you can get dies for around $20-$30 if you already have a press. http://cgi.ebay.com/LEE-LOADER-32-W...ryZ31825QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Bullets are a little harder. You need to find 170 grain .321 dia Flat Point or Flat Nose since these are going into a tube magazine. Crimping is a must to avoid set-back. Speer and Hornady make them. http://www.midwayusa.com/ebrowse.ex...020&categorystring=9315***652***675***9016***
You can also get lead bullets from Gardner's Cache http://gardnerscache.com/32win_spl_170_lfp_g_c.html
I've also got a Win 94 in .32 WS that I load for. I use a Lee Loader, IMR 3031 or 4198, Remington 9 1/2 or CCI Rifle primers (NOT Magnum).
PM or e-mail me, if you have any other questions.
bigger jon
Member
Thx Scout26 that was great info, Sound easer to fire form than I thought..
PM responded to Mr White Thx
PM responded to Mr White Thx
MMCSRET
Member
I load for a winchester 94 and a marlin 336a in 32WS. Just run your 30-30 case into the 32 sizing die and load it . It headspaces on the rim so fireforming in this case is an unnecessary step.
- Status
