Looking for some online reloading bullets

[ArchAngelCD]

I loaded some Berrys I had on hand they worked great. But I'm really digging these RMR 180 grains fmj bullets. They were right at about 100 bucks shipped to my door for 1000 of them. I came across a pound of titegroup for under 20 bucks. The titegroup seems to meter decent enough for me in my autodisk. Looking forward to this new combo. Next Ill try Missouri Bullet. Thanks.

I know you said you have Titegroup, W231 and Bullsye on hand but IMO all three are too fast for the 40 S&W. Add the fact most kbooms with the 40 S&W seem to include Titegroup I would recommend a different powder.

In the 40 there are many choices with AA#7 seeming to be the best choice. Titegroup scares me with its very small charges and possible pressure spikes and being a very fast powder.

I load coated bullets in the 9mm and they work very well. I tried to make them fail and pushed a 124gr bullet to over 1200 fps with no leading because the coating held. I'm sure the same will hold true with costed bullets in the 40.

 

[JohnhenrySTL]

Have you ever tried AA#7 in a Lee autodisk?

 

[oldreloader]

Have you ever tried AA#7 in a Lee autodisk?

I have and it works great.

 

[ArchAngelCD]

Have you ever tried AA#7 in a Lee autodisk?

AA#7 is a Ball Powder and like other ball powders it meters like water in the AutoDisk. W231/HP-38, W296/H110, HS-6, Zip, AA#2 and AA#5 are some of the other ball powders I use/used in the AutoDisk.

 

[hdwhit]

In addition to the sellers already mentioned, I have also had good luck with: evergladesammo.com