Saiga IZ132 7.62 " Factory". parts needed
- Thread starter Two shot burst
- Start date
- Status
If you cant get them i can likely get them for you but im not sure about the cost.. if you need ANY stock Saiga parts PM me a photo of the part and im %95 sure i can get it.. cost will vary.. I have done a LOT of conversions and have performed several for people so i probably know someone with the parts you need.. let me know...
If you cant get them i can likely get them for you but im not sure about the cost.. if you need ANY stock Saiga parts PM me a photo of the part and im %95 sure i can get it.. cost will vary.. I have done a LOT of conversions and have performed several for people so i probably know someone with the parts you need.. let me know...
Sir that's all great and fine. BUT only the one Mdl I listed works.I'm not conerting anything .Again Mdl IZ132 with BHO feature 7.62X39 HUNTING Style Weapon.
Thank you
Benny
Sir that's all great and fine. BUT only the one Mdl I listed works.I'm not conerting anything .Again Mdl IZ132 with BHO feature 7.62X39 HUNTING Style Weapon.
Thank you
Benny
i understand.. when we convert them.. we end up with the FACTORY parts left over.. some people hang onto them.. others sell them.. i know several people with CONVERTED Saigas who would likely sell you ANY factory parts you need..
i just need to know EXACTLY what you need...
just trying to help..
i just need to know EXACTLY what you need...
just trying to help..
i just need to know EXACTLY what you need...
just trying to help..
The Hammer which is # 20and whats called the trigger mechanism. NO TRIGGER just the unit that mounts on it Which is # 24 per parts manual.
But I have a few great posters that are sending them to me. Hoping they work in this HUNTING Model. Which is to be a totaly differt set up. I do noy know. again I thank all of you for the help
Benny
just trying to help..
The Hammer which is # 20and whats called the trigger mechanism. NO TRIGGER just the unit that mounts on it Which is # 24 per parts manual.
But I have a few great posters that are sending them to me. Hoping they work in this HUNTING Model. Which is to be a totaly differt set up. I do noy know. again I thank all of you for the help
Benny
Avenger29 What do you mean Change My usre name,Nevermind etc?
Do you belong to a group of bikers in SC that I may know. I have family also in SC/NC/Ga/Tex/Fla. small world. OBTW Avenger sounds sort of strong to me. JMHHO
But no I won't change it. I realy like this forum for the help and friendships I have made. Hey I'm an old Vet and have never played on forums so please except my dearest appolgies. So old that if I laugh,cough,sneeze to hard I may pee my BDUs.
B2B
Do you belong to a group of bikers in SC that I may know. I have family also in SC/NC/Ga/Tex/Fla. small world. OBTW Avenger sounds sort of strong to me. JMHHO
But no I won't change it. I realy like this forum for the help and friendships I have made. Hey I'm an old Vet and have never played on forums so please except my dearest appolgies. So old that if I laugh,cough,sneeze to hard I may pee my BDUs.
B2B
Maverick223
Member
Avenger is just trying to look out for your best interests, but as long as you destroyed the defective parts you should be fine.
Naw, I'm not a biker. I like my cage a lot. My username is something that I've been using for 4 years now, so it's a bit late to change it.
my username doesn't quite hint at a fed level crime like yours. It's probably no big deal, but I'm a big believer in personal security. Posting your name and contact info in the original post, well, not the best idea. You may want to contact a moderator and have them edit your first post to get rid of your contact info and they would be happy to help you.
I just don't want you, an innocent party, to end up as a JuniorBATFEman's resume enhancement. Some enterprising fed might ferret your thread/username/contact info out and make a case out of your predicament, and that would be a damn shame. Oh, by the way, if you do a search on your name, you will see it has already been picked up by the search crawlers.
I didn't know how to quote/personal message/post images for a long while, so in time you'll figure it out if you hang around. We're glad you found THR, one of the great forums on the net, and you'll soon have your rifle back up and running in short order. I know the Siaga stock trigger isn't the best, but it ain't the worst, either, not by a long shot.
. My username is something that I've been using for 4 years now, so it's a bit late to change it. my username doesn't quite hint at a fed level crime like yours. It's probably no big deal, but I'm a big believer in personal security. Posting your name and contact info in the original post, well, not the best idea. You may want to contact a moderator and have them edit your first post to get rid of your contact info and they would be happy to help you.
I just don't want you, an innocent party, to end up as a JuniorBATFEman's resume enhancement. Some enterprising fed might ferret your thread/username/contact info out and make a case out of your predicament, and that would be a damn shame. Oh, by the way, if you do a search on your name, you will see it has already been picked up by the search crawlers.
I didn't know how to quote/personal message/post images for a long while, so in time you'll figure it out if you hang around. We're glad you found THR, one of the great forums on the net, and you'll soon have your rifle back up and running in short order. I know the Siaga stock trigger isn't the best, but it ain't the worst, either, not by a long shot.
Hoping to get these parts this may help?
I need the Hammer & Trigger mechanism Has to be from the weapon pictured.No other parts will fit.I need orignal Factory parts?
Thanks In Advance
Benny
Manufacturer Description: THE SAIGA IS AN AUTOLOADING RIFLE with a hunting buttstock and fore end (plastic). The Saiga rifles are intended for hunting big and medium-sized game under different climatic conditions. The rifles are developed on the base of the venerable Kalashnikov assault rifle and chambered for 7.62x39 and. 223 Rem (5.56x45) cartridges.
I need the Hammer & Trigger mechanism Has to be from the weapon pictured.No other parts will fit.I need orignal Factory parts?
Thanks In Advance
Benny
Manufacturer Description: THE SAIGA IS AN AUTOLOADING RIFLE with a hunting buttstock and fore end (plastic). The Saiga rifles are intended for hunting big and medium-sized game under different climatic conditions. The rifles are developed on the base of the venerable Kalashnikov assault rifle and chambered for 7.62x39 and. 223 Rem (5.56x45) cartridges.
a Saiga in 7.62x39 is that.. the factory fire control group is the same.. the only ones that are different are a) ones that have been converted and b) ones sold in places other than the US where properly configured AK style rifles are not frowned on.. so the parts you need should be ANY standard saiga fire control group.. like i said if you cant find the parts you need let me know im sure i know someone who has what you need..
if someone already is sending it to you, thats fine also..
if someone already is sending it to you, thats fine also..
Bad parts melted down . So I hope the folks that sent me the items work .All I read is this issue isn't interchangable with other AKs Manufacures. It's said to be loner. But hey I'm new at this.
again thanks to all.
again thanks to all.
Good deal, and again, hope your rifle gets up and running soon! I hate having my guns down and unusable...
I do also. I love it.but the trigger sucked. Can not interchange it unless it is converted. I want it just as it looks. Sporty Hunting weapon not an assault looking monster. LOL
Thank you
Reviewed By: Dennis
Reviewed On: 6/24/06
Overall Rating: 10 Stars out of 10 Stars
Review: This is an extremely well-made rifle that is far superior to the competing AK designs that I've owne. These are made at Izhevsk, which apparently has tight quality control. The gun has been re-engineered to not accept any original AK internal parts, which is appropriate for a sporting rifle or target gun.
Pros: Proper length of pull generates excellent handling qualities, 21-inch barrel produces higher velocities and longer sight radius. Gas tube and receiver cover are xtra heavy duty.
Cons: Barrel could stand to be 10 or 12 oz heavier. The gun is a little on the light side for off-hand shooting.
Item Description:
Ease of Use: very easy
Quality: Excellent
Size:
Weight:
Price:
Reviewed By: Mike
Reviewed On: May 30th
Overall Rating: 9 Stars out of 10 Stars
Review: Very good rifle to own. Definitely worth the money, and better quality than most AK models out there. Come factory w/ chrome-lined barrel, reliable, and when in factory configuration, not very heavy. Good all around rifle, and a great one to buy.
Pros: Reliable, tough. Simple internal design, making replacing parts an ease. Easy to dissasemble and clean.
Cons: Little heavy, although, it depends on what you do to it.
Item Description:
Ease of Use: Competition, Pleasure (Maybe Hunting Too)
Quality: It's Russian... They invented the AK (It's Supreme)
Size: ???
Weight: Not too light, but not bad.
Price: Well... I got mine for a steal.
"No bastard ever won a war by dying for his country.
He won it by making the other poor dumb bastard die for his country."
Thank you
Reviewed By: Dennis
Reviewed On: 6/24/06
Overall Rating: 10 Stars out of 10 Stars
Review: This is an extremely well-made rifle that is far superior to the competing AK designs that I've owne. These are made at Izhevsk, which apparently has tight quality control. The gun has been re-engineered to not accept any original AK internal parts, which is appropriate for a sporting rifle or target gun.
Pros: Proper length of pull generates excellent handling qualities, 21-inch barrel produces higher velocities and longer sight radius. Gas tube and receiver cover are xtra heavy duty.
Cons: Barrel could stand to be 10 or 12 oz heavier. The gun is a little on the light side for off-hand shooting.
Item Description:
Ease of Use: very easy
Quality: Excellent
Size:
Weight:
Price:
Reviewed By: Mike
Reviewed On: May 30th
Overall Rating: 9 Stars out of 10 Stars
Review: Very good rifle to own. Definitely worth the money, and better quality than most AK models out there. Come factory w/ chrome-lined barrel, reliable, and when in factory configuration, not very heavy. Good all around rifle, and a great one to buy.
Pros: Reliable, tough. Simple internal design, making replacing parts an ease. Easy to dissasemble and clean.
Cons: Little heavy, although, it depends on what you do to it.
Item Description:
Ease of Use: Competition, Pleasure (Maybe Hunting Too)
Quality: It's Russian... They invented the AK (It's Supreme)
Size: ???
Weight: Not too light, but not bad.
Price: Well... I got mine for a steal.
"No bastard ever won a war by dying for his country.
He won it by making the other poor dumb bastard die for his country."
ok let me try one more time.. my "assult looking monster"..
CAME from the factory in HUNTING configuration with the monte carlo stock and the not so smooth trigger...
SO when we move the fire control group (trigger and other parts) forward we replace them.. so we end up with lots of FACTORY HUNTING fire control groups left over...
which is what i THINK you are looking for..
CAME from the factory in HUNTING configuration with the monte carlo stock and the not so smooth trigger...
SO when we move the fire control group (trigger and other parts) forward we replace them.. so we end up with lots of FACTORY HUNTING fire control groups left over...
which is what i THINK you are looking for..
Maverick223
Member
- Status
