I'm not sure what your setup is, but I run single cases through, set up my dies powder fill and measure the results, if something changes Im the one doing it not the machine,
Dillon 650.
I'm not sure what your setup is, but I run single cases through, set up my dies powder fill and measure the results, if something changes Im the one doing it not the machine,
I'm not sure what your setup is, but I run single cases through, set up my dies powder fill and measure the results, if something changes Im the one doing it not the machine,
Mine isnt a 650. Thats interesting that you would encounter 'changing' conditions.
I single load my precision rifle rounds on a 650 and don't experience any "changing conditions" so I'm not sure what's going on with @Texas10mm and his press
If there's not brass in station 1 then the seating depth will change at station 4. There are several posts about this over at Brian Enos forums.
If there's not brass in station 1 then the seating depth will change at station 4. There are several posts about this over at Brian Enos forums.
My RCBS Pro 2000 does the same when combo seating/crimping in station 5. Without a case in station 1, the seating depth will be 2 or 3 thou different than with a case in station 1. But, that's to be expected since it's not blue.If there's not brass in station 1 then the seating depth will change at station 4. There are several posts about this over at Brian Enos forums.
As I look through these posts it looks like theirs alot of Dillon haters around here
I dont spend much time internet sluething so Im wondering why that is? I have had nothing but real good experience with the products and the company. I have Rcbs and lyman presses, single stage and an old turret, and have no issues with either of them, I use different dies than Dillon and an assortment of tooling to reload for 8 rifle and 4 pistol cartridges i have. Why so much down on Dillon... is this like a ' if you dont own a _______ press you suck thing or what?
As I look through these posts it looks like theirs alot of Dillon haters around here
I dont spend much time internet sluething so Im wondering why that is? I have had nothing but real good experience with the products and the company. I have Rcbs and lyman presses, single stage and an old turret, and have no issues with either of them, I use different dies than Dillon and an assortment of tooling to reload for 8 rifle and 4 pistol cartridges i have. Why so much down on Dillon... is this like a ' if you dont own a _______ press you suck thing or what?
As I look through these posts it looks like theirs alot of Dillon haters around here
I have had nothing but real good experience with the products and the company. . Why so much down on Dillon... is this like a ' if you dont own a _______ press you suck thing or what?
As I look through these posts it looks like theirs alot of Dillon haters around here
If someone is espousing a product, ask them what the drawbacks/limitations/weak points of the product are. If they can't give you a sensible list of at least 2-3, then you are likely dealing with an irrational fanboi whose comments shouldn't really carry a great deal of weight.