Misplacedtexan
Member
- Joined
- Jan 22, 2021
- Messages
- 227
[LoGALLERY=media, 4562]20220615_184716 by Misplacedtexan posted Jun 16, 2022 at 11:21 AM[/GALLERY]Works great! Beats the factory primer catch hands down!
Looks like clear Tygon tubing and an 8 gal waste basket to me.
What am I missing???
NoMy Rockchucker has a black primer catcher that looks nothing like this green one......and it only "sorta" works. Maybe this is what comes with a new loader now?
Cliff
Look at the pics a little closer.Looks like clear Tygon tubing and an 8 gal waste basket to me.
What am I missing???
Call em up and put a bug in his ear!Nothing for the RS5,
Got the same kit from my LGS for just a little under 3 bills a couple of years ago.I have a RCBS Rockchucker II and bought a primer catch system that mounts to the two screws at the top forward edge of the Press. The primer catch system kind of worked and had a plastic piece that went into the primer slot on the ram and was held in place by magnets. The magnets would get dirty and slip down and the spent primer would either fall on the floor or get caught and in that case. I would have to take the piece apart and clean the magnets and the slot. I ended up making one out of Aluminum and drilled the ram and taped it for a set screw. It never misses a beat and with my clear tubing mounted and put into a coffee can mounted under my reload bench, I hear every spent primer hit inside the can. I also have a RCBS Rockchucker 4 but it doesn't have the same forward area. I bought the II at a garage sale for $25.00 and I know I got a good deal and it is the one I use all the time. I bought the Rockchucker 4 complete kit in 2013 from Natchez for less than $300.00 with everything you need for reloading, even a Speer manual #14. I have since purchased many dies and tools for reloading the many calibers that I have.
You're gonna love it, great upgrade!I just bought one of the magnetic ones, Thanks!
I have had one of these for a few years now. It catches all of the primers. This is worth every penny and I highly recommend it.Works great! Beats the factory primer catch hands down!
Or:It's what all the cool kids do
Cool idea!You need to run that output tube into a plastic coke bottle mounted in a marine cupholder. It's what all the cool kids do.
View attachment 1084647
That is some hotness right there, very cool with the little drawer. Sadly, I'd fill that in about 4 minutes or so. If somebody made one that was about 5X bigger, I'd replace my coke bottle for sure.Or:
View attachment 1084654 View attachment 1084655
https://elite3ddesign.com/collectio...ker-supreme-and-rc-iv-primer-catcher-w-drawer
(A little 'too cool' for my taste! LOL!)