B

broham

Member
Joined
Last seen
Messages
253
Reaction score
61
Points
28

Latest activity Postings Images About

    • B
      broham replied to the thread 6mm Rem seating help.
      Well the new correct die body came in. It too is unmarked like the original one but works out fine. I just put the internals of the...
    • B
      broham reacted to marksman13's post in the thread Picked up another Ruger No. 1… (45-70) with Like Like.
      Finally got the 45-70 zeroed this morning. It was a little more fierce from the bench than it was off the shooting sticks, but not...
    • B
      broham replied to the thread 257 Weatherby sizing.
      This is all excellent information. I'll run my brass through it and should be good. For now I'll be using the new brass. That will keep...
    • B
      broham replied to the thread 257 Weatherby sizing.
      You are correct, my mistake this is Norma brass. I dont know what I was thinking. The OFB was marked Weatherby that I was having an...
    • B
      broham replied to the thread 257 Weatherby sizing.
      Correct. In fact several people in my search had said they have come in contact with once fired weatherby brass that needed a collet...
    • B
      broham replied to the thread 257 Weatherby sizing.
      What really sucks is when they put them on cases that don't need them, just do it for sales.
    • B
      broham replied to the thread 257 Weatherby sizing.
      Definitely. I have been just putting a piece of brass in alone and the bolt won't close on some, a good push to chamber it to just...
    • B
      broham replied to the thread 257 Weatherby sizing.
      I'd say most likely no to annealing as it's once fired. The die has been adjusted to barely cammed over to some good oomph. It seems as...
    • B
      broham replied to the thread 257 Weatherby sizing.
      No. It's on a coax. I adjusted the die per directions, it just doesn't seem to size them enough. The gun is brand new, Weatherby...
    • B
      broham posted the thread 257 Weatherby sizing in Handloading and Reloading.
      Good afternoon all hope your enjoying g your day. I am in the process of loading up some rounds for my 257 Weatherby. I have some new...
    • B
      broham replied to the thread 6mm Rem seating help.
      Well I recieved the new die body. Unfortunately it's not the right part. I was sent a 280 JDJ sizing body. The die i need is the seating...
      • 20250111_192035.jpg
    • B
      broham replied to the thread 6mm Rem seating help.
      Well Hornady is shipping out the fix. Thanks a million for all your help and suggestions on the matter. Here's their responce.
      • Screenshot_20250107_085904_Yahoo Mail.jpg
    • B
      broham replied to the thread 6mm Rem seating help.
      Oh bummer sorry to hear it. Ya hopefully it does work, if not I already ordered one thinking I could just cancel my backorder. Have a...
    • B
      broham replied to the thread 6mm Rem seating help.
      Will do, thanks. I believe i may have jumped the gun though on my end. Midway was back ordered as well as every other place I looked at...
    • B
      broham replied to the thread 6mm Rem seating help.
      Well i would think they should send you one like mine. It's not advertised may not work with some presses. Worth a shot :)
    Show older items
  • Loading…
  • Loading…
  • Loading…
Back
Top