Recent content by broken

Learned from a oldtimer on greybeard years back,to use a Nickle and w atever oil I had around. Usually sewing machine oil..havent used steel wool since..put plenty towels or paper down..cleaned a few real rusty mausers..if not pitted..works..

It's just a back door varment gun..alwys fires.i yanked all the lifter out,drove out a pin.and added the box back that snaps in with a double shimmed piece of Pepsi can.to block the hole.shells slide right in..heck I can load it bout as fast as the lifter..thanks..

Didn't realize I didn't say bolt action. Ooops..still having trouble feeding..i took everything/lifter out. Was simple,Except I left the empty tube because it fastens to the barrel to keep it from wobbling.can I radius the entry/exit port so I can feed it shells easier..im assu.ing I can..

Just forget it..gonna try and diagnose the problem..

I have a decent old long barreled tube feed jc higgins 12 gauge,it shoots brass end shells fine most of the rime..no problem,but usually all I can find are aluminum end,they are finiky as crap,anyway I'm gonna have the barrel shortened,beed reinstalled,but can the tube and lifter and stuff be...

.. well I finally found a picture of a plate and trigger assembly on numrich. it seems I am missing a trigger spring.i found a square or u shaped spring on another diagram,mine doesn't have one that goes over both triggers, but it will still fire the right barrel,front trigger, can anyone tell...

Well I tried to upload a few pics..the forum said I'm missing a security certificate,whatever the piss that is..never had a problem anywhere else..I've got it back apart..I've don't know how to tell about the internal hammers.. I'm a little green on doubles..thanks for the info.though..glad you...

I have a short 20" barreled nitro special that only fires the front trigger,right barrel,the back trigger just pulls back no click,both firepins are free and pop in and out of receiver,how do I disassemble this critter, thought I might try to fix it,ive repaired a few junk pumps in the past...

.. i just checked my ammo,winchester x hollow point varmint copper flat points at 1280 fps .it hates those, and federal blue box,lead rn at 1240 fps sometimes it will go through a full tube 8/9 rounds,then next it will crush an empty on 2nd,or 3rd fire between bolt and front receiver port,i...

I picked up a little glenfield 75 carbine,looks like a m1 or ruger 10/22 kinda, in rough shape missing the stock to receiver screws,gummed up action,wouldnt fire,anyway got her took apart cleaned up ,refinished stock,action screwed down into stock,it shoots now,but on 3rd sometimes 5th round...

thanks.. put a piece of leather I trimmed to fit behind the finger release/spring,like you said,worked like a charm. just shot it ,feedin fine .. thanks..

... thanks..very much..

I have a 20 gauge Mossberg 185 d/b bolt gun for varmints, real handy but after I fire it it ejects the magazine a little ways, and wont pick up the second shell unless I hold it in,which aint no big deal really,just thought someone might know if its the magazine catch or the magazine. I found...

got it.. got the pin installed right. fixed thanks.. good to go..

got er done.. well got the bracket in finaly.guns back together,everything seems fine,lot smoother,cleaned up,anyway you wouldnt know what size that pin for the trigger group is would ya by chance,i heard one could be made from a drill bit,before I deal with numrich again,i realy buggered the...