Recent content by cvo

  1. C

    MidwayUSA had H335 powder for six minutes today

    Just received 40lbs today, set for now.
  2. C

    Varget vs Tac

    I just loaded some SMK with Varget, using a Harrell's Precision. Its pretty consistent with in .1 grain. The TAC stayed right on the money, no variation at all.
  3. C

    Varget vs Tac

    I have a 18" JP upper I am going to try some 77 SMK through. I have both powders, whats your thoughts on the two powders with the 18" barrel. SMK's are cannelure. BTW, I am not worried about the metering of Varget, and I know TAC is more temperature sensitive.
  4. C

    Trimming .556 brass

    Well for now I am going to buy processed LC brass for $85 per K. But someone needs to come up with a magic bucket for sizing, because its to time consuming.
  5. C

    Test of Dillon Case Lube and Affects on Reliability

    I never spray the cases, I spray a flat pan lightly, and roll the cases on the pan.
  6. C

    Trimming .556 brass

    Besides using a Dillion trimmer, what is the other options?
  7. C

    Dillion 550 powder bar question

    I've always loaded pistol on the 550, so its time to change the powder bar to large for 223.
  8. C

    Dillion 550 powder bar question

    I found the info on Dillion site, its says 20 on the small. No mention of powder type.
  9. C

    Dillion 550 powder bar question

    What is the max grains out of the small bar?
  10. C

    I wish all Governors were this straight forward about the 2nd amendment

    Just don't get caught carrying 6ft of string, that may get you in hot water.
  11. C

    MG 124 FMJ with 231

    bds, thanks for the info.
  12. C

    MG 124 FMJ with 231

    Anyone using Power Pistol? I've had a couple loads recommended at the below, but I can't find any book info, this seems hot.
  13. C

    MG 124 FMJ with 231

    Hornday book lists no 124 with 231 Lee shows a 124 FMJ starting at 4.2 gr 231 1.095 col Speer shows a 124 TMJ starting at 4.0 gr 231 1.135 col Lyman doesn't not show a 124FMJ Sierra shows a 125 FMJ starting at 3.9 gr 231 1.090 col I bought the Ken Waters Pet Loads, so far its...
  14. C

    MG 124 FMJ with 231

    G34 and 19
  15. C

    MG 124 FMJ with 231

    Anyone using this combination? I would like your input on your load and COL using MG 124 FMJ with 231 powder.
See more
Back
Top