Recent content by fralic76

Found out that it was the lee auto drum. It needed to be turned into the center more. It still does over index if I go to fast but when I get into a rhythm it is fine. Found the problem by removing the powder measure. Sent from my SM-G920W8 using Tapatalk

Have been a member for 2 years now. Use it with other books and online sources. Sent from my SM-G920W8 using Tapatalk

When reloading 9mm I deprime/size on a single stage. Clean, hand prime 500 to a 1000. The first stage on my Lee Classic turret is flare and powder drop. Then to a bullet feeder die, bullet seat then to a factory crimp die. Can load 300 to 400 rounds per hour if I keep my rhythm going smooth...

kcofohio, I have checked the dent ball and spring. I have an extra turret coming and will try it with the dies I have to see if that was the problem. Sent from my SM-G920W8 using Tapatalk

No it has just started Sent from my SM-G920W8 using Tapatalk

If it not the turret then what is making that 1 to over index then. Sent from my SM-G920W8 using Tapatalk

Did replace the ratchet but I'm having issues with 1 of the turrets. I have 5 different ones. Sent from my SM-G920W8 using Tapatalk

Had to replace the ratchet on my press at 2500 rounds. Thought it was worn , but now I'm thinking the turret is worn a bit. I say this because I have 5 different calibers that I reload for and the only one that over indexes is my 9mm setup. This turret has 1500 rounds on it. When I try the other...

You could check them 1 at a time on a scale. If you have 1 that is way off. That's the case that has no powder. Sent from my SM-G920W8 using Tapatalk

Hey robwo can one get a copy of that access file that you use,that's exactly what I've been looking for. I have been trying to make a database but can get the drop downs to work.

What is needed to do that? I'm looking at buying a 4 hole turret in 2014.

My first bench was a workmate with 3/4" plywood screwed to the top. I now have a 2' x 4' bench with a 1/2" top with a 2x6 on its flat under the front for mounting the press.

1 Lee Breech Lock Challenger 1 Lee Pro 1000 in 9mm 1 Lee Load All in 12 gauge and sometime in 2014 Lee Classic Turret

http://www.sterilite.com/productfiles/images/LG1_19628604.jpg Labeled with caliber --> dirty, cleaned. When cleaned a card with what step was done last is placed in the container.

Got a Pro1000 in 9mm and love it. I did the penny mod and cut a piece of 1/2" clear tubing to go over the primer arm so powder doesn't get in and give me problems. Did I say that I love it, and it wasn't that hard to set up. 45 mins from out of the box to reloading (dies all set up, had the mods...