greyling22
Latest activity Postings Attachments Images About
-
-
greyling22 replied to the thread pietta 1851 cylinder stuck on cylinder base pin. -
-
greyling22 replied to the thread pietta 1851 cylinder stuck on cylinder base pin.I got it! I cut the arbor off near flush with the front of the cylinder, put it in the drill press and drilled down about 1/3 of what...
-
-
greyling22 replied to the thread pietta 1851 cylinder stuck on cylinder base pin.freezing failed.
-
greyling22 replied to the thread pietta 1851 cylinder stuck on cylinder base pin.Well I got it nice and hot. Penetrating oil bubbling out, but it didn't budge. I'll try freezing it next.
-
greyling22 replied to the thread pietta 1851 cylinder stuck on cylinder base pin.do you think a heat gun would work, or would I need a torch? I like the heat gun approach more as it's less likely to damage the finish.
-
greyling22 replied to the thread pietta 1851 cylinder stuck on cylinder base pin.I've been soaking in ATF+diesel
-
a while back I posted that I got 5 rusty seized up BP revolvers for free. I soaked in penetrating oil for 2 weeks and started working on...
-
-
greyling22 replied to the thread 10/22 extended charging handle.I like that one. Who made it?
-
greyling22 replied to the thread Looking for 4" .357 DA Opinions.I sold my security six after shooting a 686. I want to try a colt python, but I just don't see how it could be "better"
-
Affordable is relative. Sensible is out the window on lever guns. Not too long ago a nice 30/30 was a $200 gun all day. Didn’t really...
-
My love for these lever rifles is new-found. I have always preferred bolt action rifles for nearly everything. As far as revolvers go...
-
greyling22 replied to the thread What would be the best fix for the gouge in the stock?.Unfortunately it's pretty heavily rusted. I think I'm going to be spending a lot of time with an old penny, scratching away. I've yet to...
-
greyling22 posted the thread What would be the best fix for the gouge in the stock? in Gunsmithing and Repairs.Winchester 94, 1950's vintage, rough life. What would be the best way of dealing with this big gouge in the stock. Simplest thing would...
-
-
greyling22 replied to the thread Old Beater Leverguns.I'd love to stumble upon a good deal on a 35 Remington Marlin. This is the beater lever gun I just acquired. 1950's Winchester 94 in...
-
-
greyling22 replied to the thread Lansky knife sharpener system is it worth it?.I have one. I use the worksharp now. like it better. the lansky sits in a drawer. maybe I need to try and sell it on ebay.
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
