Recent content by gunrac

+1 On the teflon tape. The Anti Seize does work well, but adds a bigger mess to clean up. IMHO

+1 on the Encore ML. When I bought mine some 10yrs. ago, I was anticapating on buying extra barrels when I bought it.. It didn't happen till this past winter. I finally caught the fever. I now have a 4 barrel set.

I would contact them an see if they would send a sample of the sabots for that bullet. Ya never know. Also hit on these guy for samples. It's nice to know what will work. Shipping's a killer on small orders. http://www.mmpsabots.com/

I couldn't take it. I put playtime before work. The Cheddite worked wonders. Didn't see the need to fool with the Win. The sabots were all intact and broke down in uniform shape. I even gained a few more F.P.S. Grouped over all at 1.284 As you can see in the pic, the gun works, it's the operater...

After running out of the RS powder, I decided to try a bottle of SELECT. I lost my group, bigtime! Short on time, losing daylight, I had still had plenty of time for around 8 loads with plenty of cool down, and swabing time between shots. What I did notice was considerably more smoke also a...

gunrac , How did you float the forearm and what is a Bellm's heavy hammer spring . Check your clearance first off. A lot of guys are satifisfied with checking it with a dollar bill, I prefer using a business card { around .012 } Back your screws off an lay 2 cards in between the barrel and...

I was always under the impression PACT made the despenser for RCBS.

It's a 26" Encore. 10 yrs. old. Roughly 300rds. She is a shooter. I added Bellm's heavy hammer springs and floated the forearm a few yrs. back. Big improvement. When pokin paper I brush between each shot. After 10 or 15 shots it needs a complete ****** job. Do yourself a favor an pitch...

I think the 26" is more then adequate.