Recent content by hellishot

When I bought my HK p9s, I opened it up and the buffer had withered away. Bought some at numrich. I extend my sympathies for your plight.

Thanks for input jackal. After examining this firearm, I am severely disappointed with the quality. The gray film coating that they used inside the upper seemed to ooze a lil out to the exterior. The person who tightened the muzzle marred it, I understand that it is inherent this this might...

recently got a pws mk116, gonna test it out and see in the days to come

The pit-like marks are on the upper receiver

Got me a LMT LM8SS 2 weeks ago and I noticed the finish is rough on it. Not sure if its the anodized process but it has what appears to be pit-like marks. Strangely I can deal with scratches or indentation since its the shipping process that create such marks. But if its the anodized process...

The later models were changed to a full polish blue job with the muzzle also blued.

More pics

You are right, its bare metal.

Hey Folks Just wanted to share my new revolver, a Colt model 357 first year 1954 in 4 inches. The back strap, top strap, bottom of trigger guard and frame, and cylinder flutes have a matte blue finish. The rest of the frame, cylinder, and barrel is polished blue. The end of the muzzle is not...

i lightly tapped the stud to straighten it......that seemed to solve my problem

Other views of the stud.....there seems to be wear on the stud

The stud (rebound slide) looks slightly bent or it could be my eyes betraying me. I circled it in red.

more photos...let me know if yall see anything abnormal. the side plates looks like something was scratching it. I do not like the looks of this so far.

So when I attempt to unscrew the screw near the hammer, it was came loose but appeared to be stuck and slighted angled to the bottom right..is this an indication that the plate is not secured correctly?

I wanted to get info if this type of hammer wear is normal on my model 27. On both sides, it looks like the wear is evenly distributed. I am concerned that maybe the hammer stud or the stud (rebound slide) could be bent causing the hammer to touch the slide plate. I will be opening it up later...