Recent content by jackmtretreat

I appreciate very much all the help with the new 7-08. I'm going to try some reloads tomorrow and see what works the best.I'll try to post the results.Thanks, again for all the help.Deer season is only a month away, so I can't wait to see what kind of results I get on Deer.

I backed the seating die out a full turn and adjusted the seating stem down to the correct setting for my desired overall case length, and it is working perfectly, no case neck collapses.My only question is, is there any need to crimp since it will be used in a bolt action rifle?The bullet is...

I just bought a steyr pro hunter mountain with a 20 inch barrel for whitetails out of a stand.I'm looking for some good loads for the 140 gr. bullet.I would like to use 4064 because I have it on hand and use it for .22-250, .243, .308, and .30-06 with excellent results.I would like to hear...

I'm trying to seat bullets in some brand new unfired hornady .376 steyr brass, and the case necks keep collapsinginto the case body, flattening out the shoulder.The mouth is staying fine, and the bullet is aligned in the case mouth fine.I had it set where it was only seating about 1/4 in. into...

Would you have any idea which powder hornady uses for the 225 gr. loads.in there factory loads??

your reply's have been very informative, and I sincerely appreciate the help. Thanks, Bryan

I couldn't find any loads posted on the scout site.I found some for .308 but not the .376.What grain bullets are you using with 4895?If it's 225 gr. can you tell me what charge of 4895 is giving the best accuracy in your gun.I have 100 pcs. of hornady brass that is primed from the factory.

Looking for loads for .225 gr. sp hornadys, and 220 gr. hornady FP's.Basically brush gun loads for white tails, and black bears.Also heavier bullets if anybody has any.Can't find anything anywhere worthwhile, except the hodgens guide, and they only list for their powders.I would really like to...

Mine are RCBS group B, which cost around $50.It takes a #42 shell holder. If you find anything out please let me know at [email protected] I've found just the normal reloading data from the hornady book.I'm going to try Varget, and 4895, to start just because I have it on hand.I'd...

I need to know what your using and what's working best for accuracy.I'm interested in 225-300 gr. bullets, mainly the .225 and .250.for whitetails and black bear in heavy brush.