-
-
JohnKSa replied to the thread Slide/Barrel Movement before Bullet Exit.I haven't checked a bunch of different autos--the ones I have checked are as in the post. As long as the slide/barrel are moving more... -
JohnKSa replied to the thread Slide/Barrel Movement before Bullet Exit.In a typical revolver, it's easy to check the bore to sight-line angle and see that aligning the sights on the target will aim the bore...
-
JohnKSa replied to the thread Slide/Barrel Movement before Bullet Exit.If you're worried about this end, there's no problem with a link.
-
JohnKSa replied to the thread Is BudK all bad?.What was the advertised manufacturer? I took at look at their most expensive "samurai sword" on their website and it's advertised as...
-
JohnKSa replied to the thread Things that gun makers won't do that seem obvious they should do..Some years ago, (in 2009, based on the date on one of the packages I still have), there was a huge influx of factory new Ruger parts for...
-
JohnKSa replied to the thread 10mm Striborg feed / cycle .40 s&w?.You will not find any manufacturer that greenlights the use of any cartridge other than the one marked on the gun in their semi-auto...
-
JohnKSa replied to the thread Things that gun makers won't do that seem obvious they should do..We might see a change here, with Gaston Glock out of the picture. At SHOT, some years ago, I spoke with a former Glock employee who...
-
Watch this video, and you will have a greater appreciation and understanding of how much unburned powder is leaving the muzzle with each...
-
JohnKSa replied to the thread Slide/Barrel Movement before Bullet Exit.Right. In a revolver, the breech is fixed to the frame, so the frame begins to move the instant the bullet does. In a design with a...
-
JohnKSa replied to the thread S&W 632UC Kaboom.It's an overcharge, and not a small one. A double or triple. The "detonation" explanation (light charge of powder blowing up instead...
-
@Ethan Verity posted this in another thread, but I thought it would be useful in the Semi-Auto Handgun subforum. The topic of whether...
-
JohnKSa replied to the thread Is Cold Weather Hard On Leather Holsters?.Here's Milt Sparks advice on maintaining holsters. https://www.miltsparks.com/questions/#1649974474778-1f7e4b43-5f87 (This question is...
-
JohnKSa replied to the thread NRA/CCW Instructors.You know, I'm not sure where I got that idea. Looking at the NRA website, I don't think it's correct. In fact, they even say that as...
-
JohnKSa replied to the thread NRA/CCW Instructors.To answer the other question, any time anyone does anything, there's some potential liability. The NRA does offer insurance to their...
-
JohnKSa replied to the thread NRA/CCW Instructors.If you don't want to follow their curriculum then you can't teach their courses or bill yourself as being certified by them. You're...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
