Recent content by swiss_seth

I have had really good results with PMC .223 brass Stay away form Fiocchi, when I used those they had really tight primer pockets that I had take the crimp out even though there weren't supposed to be crimped

I have been using 700x behind 230 gr hard cast with my Kimber. It ran perfectly with nice groups and was pretty clean. Not the kind of bullets you're talking about but just a FYI 700X is good stuff If memory serves I had lighter loads with WST and still good results

I wasnt bashing all the bullets, just the 230's, 9's were fine If this is a freak occurrence than it shouldnt matter because MBC stuff is great. I was just posting this based on my experience from ordering two 500 packs of 230's two different times and getting bullets with issues. So anyway...

here are some more photos I just took because of lighting etc. from the first pics. I want to be as accurate as possible. 147 gr 9mm from MBC are okay but lube is still tacky and all over the bullets instead of just in the lube channel: These are the 230 gr 45, tacky lube and the...

I am talking about the same loads between 230 gr LRN bullets, not the ones pictured. I loaded 230 gr LRN MBC and 230 gr LRN mastercast and the MBC left tons of leading the other didn't, thats all I was saying. It was the same recipe/poweder/ OAL etc. I didnt load the 185's to the same spec as...

what are you talking about? I met the guy and he doesnt seem like as sleaze. Plus his prices are fair and quality is good. What am I missing? Also my load was fine and by the book/reloading manual. One created leading and one didnt with the same recipe. You explain that to me...

I knew this wouldnt be received well but I was just stating my first hand account of what happened to me. I couldnt care less about how shiny the bullets are however I do care about bullet trimming slop which leaves bits of lead on the bottom of the bullet, sloppy lube application and...

Just a quick introduction, I meant to join 8 months ago but never got the chance. I reload 10mm, 45 ACP, 9mm and 5.56 all on a RL550B. I usually post on HKPRO and SigForum - Reloading forum I just wanted to ask if anyone has had the chance to use Mastercast bullets out of Enon Valley, PA...