Hi, I ran across a sear with some Sharps rifle parts. I don't think that it is a Sharps or TD Springfield or 1861 Springfield sear. Any ideas? Thanks! Dave
I'm pretty sure it is not a 1911 part. It also isn't quite like the 1874 sear in the above pic. The hole for the sear screw on the mystery sear is about half the diameter of a Sharps sear screw hole (at least all of the ones I've seen). Also, the angle on the engagement "neck" is different.
Wait. I looked at the picture again. Is the part symmetrical or is the sear edge attached on the edge sitting on the table? And the hole is round, on a 1911 it's more square. Sorry. Not a 1911 part.
Wait. I looked at the picture again. Is the part symmetrical or is the sear edge attached on the edge sitting on the table? And the hole is round, on a 1911 it's more square. Sorry. Not a 1911 part.
I have seen roughly that shape in side by side shotguns with external hammers. The triggers in a TTN hammered coach gun look a lot like that. This one would be for the right barrel; the one for the left barrel would be a mirror image.
The true sear in the sidelock engages the hammer; that long horizontal projection pushes on the true sear to release the hammer when the trigger is pulled. The part we are looking at does not engage the hammer directly, I think. Maybe.
If the mystery sear is like that on many Civil War era guns, the beveled nose (by the number "7") engages the tumbler, which has the hammer attached to it. The trigger engages the long horizontal leg.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.