EuroArms parts
- Thread starter SSBN617b
- Start date
- Status
falmike
Member
Try Dixie Gun Works
hawg
Member
ebay
44 Dave
Member
Sometimes screws can be lightly "hammered" back in shape and the slots cleaned up with a jeweler's saw then fire blued and quenched.
Jackrabbit1957
Member
- Joined
- Apr 6, 2018
- Messages
- 2,872
Try VTI, they most likely have something that's more correct than Ace hardware.
hawg
Member
They don't list Euroarms parts. Uberti or ASM screws "might" work.
AlexanderA
Member
Euroarms was more a marketing arrangement than a manufacturer. For example, my Euroarms '58 Remmie was actually made by Armi San Paolo. My Euroarms M1861 musket is identical to my Pedersoli M1861 musket, leading me to conclude that they were made on the same tooling.
The Euroarms / Armi San Paolo handguns have some close similarities with the equivalent Uberti handguns (Remmie cylinders will swap, for example). The first thing I would do is see if Uberti parts will fit.
The Euroarms / Armi San Paolo handguns have some close similarities with the equivalent Uberti handguns (Remmie cylinders will swap, for example). The first thing I would do is see if Uberti parts will fit.
Fingers McGee
Member
S&S Firearms has EuroArms parts
Don Van Winkle
Member
Wolf springs may have some too. Not track of the wolf but google wolf springs. I also saw somewhere there were packs of screws and springs as a replacement pack for whichever make of BP revolver you have; I just have lost my memory after I retired.
hawg
Member
Wolff only sells springs.
My plan is to take the screws to a local Ace and try to replace them there and if not at least figure out what sizes they are. Knowing that I have a chance of buying online. I will probably buy a set for a Uberti just in case they match, if not I have room to the parts bin.
- Status
Similar threads
