• You are using the old High Contrast theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.

Search results for query: *

  1. R

    1:8 twist 22" bull barrel AR

    75gr with 4895 I tried this myself and they where really compressing the loads and the seater die would ring the bullets.
  2. R

    Belted magnum question 300 wm

    Well after receiving my die from Larry Willis, it worked like a charm. I can now say my brass does fit the case gage and the bulge is gone. At first I was having a issue with the die and the brass getting stuck in the press. I figured out the bolting the press to large 6x6 piece of wood and...
  3. R

    Belted magnum question 300 wm

    My buddy has one of these, I called him up to see if he can resize the belt. If it works, I will have to buy one.
  4. R

    Belted magnum question 300 wm

    You know, I never tried to fit the brass in the rifle I will have to try it.
  5. R

    Belted magnum question 300 wm

    Want do you guys do with the brass when the belt on brass no longer fits in a case gage? I have tried resizing all this brass but that doesn't fix it.
  6. R

    Prepping rifle brass for reloading

    What?, you don't resize the brass? Never trim brass unless it's been sized.
  7. R

    .223 troubles

    I hate them too, but I trim with a 3-way trimmer which allows the flat base bullets to seat better.
  8. R

    Tip for primer pocket cleaning

    Try using a rcbs primer pocket uni-former. I use both a flash hole cleaner and the uni-former.
  9. R

    How do I anneal necked rifle brass?

    Over the last weekend I took a pic of annealing my 223 brass.
  10. R

    Should I Switch to a Wet Rotary Tumbler?

    I do all my rifle cases in wet media, and all pistol in corn cob. Do not mix pistol cases in wet media as they will get stuck.
  11. R

    Primer Pocket depth

    Agree, this is the same procedure I do.
  12. R

    DOLOS AR15 Quick Detach Barrel

    I just finished my Dolos takedown conversion. As you can see in the pics, it fits great into my briefcase.
  13. R

    preferred powders for reloading AR-15s

    Benchmark, H335, A2230 for my 55gr bullets And RL15 for my 75gr bullets.
  14. R

    RCBS 3 Way cutter Inside Bevel adjustment?

    Just ran a batch on mine using the .233 3-way cutter. I setup the cutter using a piece of brass and the cutter in my hand and twisting it on the brass to get the right adjustment before installing the cutter back on the machine.
  15. R

    Frankford Arsenal Rotary Tumbler

    I have both, go with the frankford. The lortone is very limited with the weight. Both work good, but I would stick with frankford.
  16. R

    bullet puller

    It's much faster than the hammer type. I recommend the RCBS collet puller.
  17. R

    concentricity

    Before you seat any bullet check the concentricity of the brass first, then proceed to seat the bullet. Then check again, this will tell you if there is a problem with the seating die.
  18. R

    Show us a picture of your reloading bench

    Now that is what I call taking your work to sleep with you.
  19. R

    CCI primer issues

    Cci primers are chrome in color.
  20. R

    Western Cartridge 223 brass questions

    I do all my primer pockets with a RCBS primer pocket uniformer.
Back
Top