Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
You are using the old Black Responsive theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.
I know that alot of folks like them, and that's great.
But since you asked...
My advice to you is to stay away, but if you must use their "services", be very careful with GB. They are VERY biased towards the seller. If you have a problem with a transaction, don't expect GB to help AT ALL...
How did you determine their "BG" status?
"possibly a firearm"? You had better be sure. "Possibly" doesn't allow you to draw down. At this point you suspect some "BG" might possibly have a firearm, that's pretty weak.
If you see me at the general store near my camp, you might get a glimpse of...
In MA, you will get:
The gun itself.
Two 10 rnd Klinton magazines.
Cleaning brush (crap)
Factory documentation (owner's manual)
A lock of some type.
Carrying case.
I know you didn't ask but...take good care of the finish on this gun, they're prone to problems, but getting better...
When I eject the chambered round, I put a small mark on the casing with a sharpie. That round now goes to the bottom of the magazine. I repeat this process until I have a full mag of "marked" rounds. When this happens, I fire the entire mag at the range. Then I start over.
I would not...
Posted by HSMITH
Exactly.
Very few folks I know of have hands that are truly too small for a G19.
I don't like the feel of (and can't hit anything with) a "naked" Glock grip, definitely try some kind of enhancement before you walk away from a great design. Strategically applied skateboard...
The measure of any vendor/broker is how the parties are treated when things go badly. GB ALWAYS sides with the seller, it's good for their pocketbook.
I give my opinion only because the question was asked. I don't want to see other folks get screwed. Do with my advice what you will, if you've...
Glock did not switch to the polymer guiderod, that is the original design.
Broken guiderods are almost invariably the result of improper installation (wrong lug on barrel)
Your stock guiderod will NOT melt. It is used in the G18 (full auto), it is effectively cooled every time the slide...
Need schematic drawing of S&W model 908. Would like to know how to change the grips, and I need to know what is underneath so that I do it properly. Disassembly instructions would also be helpful.
Thanks
Tim
I have a new S&W 908. I can't seem to find many holsters for this model. What other S&W autos have the same or similar dimensions? I will only be carrying at the range, so I don't want to spend alot on this particular item. I do need positive retention, though; maybe a strap, but no "thumbreak"...
It's a familiar tale...
I was buying ammunition. Next thing I know, I have a new S&W model 908 in my gunsafe. It's all just a blur. ;)
I have never owned a S&W autoloader before, I have Glocks and a Walther.
Anything I should know that "aint in the book"? Does this gun have any...
No big problems
IMHO the trigger spring on the 30 (and all Glocks) should be replaced annually as part of your preventive maintenance schedule for all your guns, particularly a carry gun. In fact, I replace all springs yearly, I know it seems pretty often, but it makes me feel good, and its...
I'm not familiar with Speer African Grand Slam Solids, they may well be both tungsten core and perfectly legal (where you are). I wouldn't like to be caught carrying them in say, Boston. I did say "some juridictions".
At any rate, the point of my post was that in MOST SITUATIONS, no good can...
I would have to strongly advise against against carrying off-body.
1)Kids love ladies purses. Even if you don't have kids, they are everywhere. Even if they shouldn't go into your stuff, they still might.
2)She could put the thing down and forget it. It happens. Everyone that ever does it...
Tungsten IS NON-FERROUS, and is immune to standard magnetic attraction. The cores in question are not tungsten. Likely not a tungsten alloy either, it's very difficult and expensive to alloy (besides, it would be pointless in this application). Also, the density of tungsten would allow you to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.