Search results for query: *

How can you go wrong?? ~~~~~~~~~CHECK THIS SHOPPING LIST. I JUST BOUGHT A ENTIRE RELOAD SETUP FOR CHEAP!!!! I got the Lee Challenger kit from CABELAS, it come with the (quick bushing and auto primer, as well as the press, powder measure and scale.) This kit has everything but the...

So, I bought reloder 22 for my .30-06 & .270. The recipe manual I have lists the Reloder 22 as the #2 on the list of 40 for the .270(130gr). It lists #6 for the .30-06(180gr). These lists are in order of accuracy. The reloder 22 is generally for higher power magnum rounds(7mm, 300win, etc)...

I had the same problem with my Lee deluxe dies. I found that I had the correct amount of turns on the die (1 1/4 turns) What I was doing wrong was simply not applying the extra needed pressure that they state when using them. I bottomed out the die but didnt press the extra 25-40lbs they call...

I did get a scale with the kit. I have come to find that the charge of 56grains for .270 and 57grains for .30-06 nearly fill the casing. Is that normal? The book states that Its possible to use 63-c grains compressed. We are only using 57 grains tho. We tried a sample case with 63 grains...

I just got my Lee Challenger kit today with the works, like brushes, trimmers, lube, tumbler, media, etc. everthing! I am a brand new reloader, but have studied alot and read the LEE Second edition. MY PROBLEM: I noticed that the LEE Book and Alliants website say that it is ok to use Reloder...

Thanks for the feedbacks fellas. And for the story.... I have checked with a few local guys and pretty much got the same response. Nobody wants to tell me directly "dont do-it" or "go ahead." I understand, everytime you turn around someone is trying to sue yah. I think I will just load 20 at...

I have done alot of research with this question and cant seem to get a black/white answer anywhere. I know that someone here has the answer. As everyone here knows supplies are limited and the Remington BR Primers were available through midsouthshooters, as No on else had any primers in stock...

I figured it out Geronimo. Thanks The internal bolt in the butt of the gun is the spring tensioner and the exterior ring is to hold the buttstock tight to the body. The internal screw was to tight.

I shot my shotgun three times and all was fine. Now all the sudden the feed arm wont go up to load the shell from the plug tube, and the slide/action wont stay put at the rear of the body when empty. Any ideas?...spring?? pin?? Winchester model 50 12 ga. semi-auto

I am looking at purcahsing a Shotgun. Winchester Model 50. Serial number 6175_ . Can anyone tell me the age of the gun. I live in california, I know, I know. It stinks for gun owners out here. But If the gun is 50+yrs old, its a cash and carry deal. Anybody know where to find that sort of...