Search results for query: *

Quick update guys: 1) Removed gas block 2) Verified no debris 3) Measured whole to be .89 4) Drilled it out carefully with a .96 sized bit based on barrel length, and gas system length, from resources provided above. 5) Test fired perfectly. Thanks a lot guys this one has been to and fro on the...

@Jackel I might try that. I do have a buffer kit I could use as well as wood replacements for the weight. Trouble is I do not have a quick/easy way to verify/test to get the buffer weight, but the same arguement could be made for drilling out the gas port...

Dont have a reamer, and what would be the "correct" size holes?.

All thanks for the advice. I have not been able to test lock back after firing more the block and blow technique yet. But here is the barrel used...

Do you know the hole size it should be? 1:8 twist and rifle length gas system - if that info helps. I will tear it down and check it out tomorrow to ensure it is clear and the diameter. Update you when I get it tore down.

I did not drill the barrel hole. I assume it would be standard size for rifle length gas system?

Hey guys, I built an AR-15 with a rifle length gas system and a luthar adjustable stock with a rifle buffer. This has a 20 inch SS fluted barrel chambered in .223 wylde. I cannot get this rifle to cycle and I am asking for your help please! To catch you up: I have never been able to get...

A few weeks ago, I was working on an AR-15 lower receiver. It was an 80% lower that I had done the milling on. I found a hole in the lower not wide enought for the detent pin and spring. I believed it was just some paint or other defect obstructing the install. I decided to drill it out...

I want to build a rifle in an M-16 like configuration circa the Vietnam era and was hopping some of you might know sources for parts? I was thinking of the carry handle upper receiver(single piece) with a 22" barrel, rifle length gas system with classic pinned gas block, and bakelite handguard...

I have been away from THR for the past few months and I am heart broken to return to hear one of the kindest and most knowledgeable souls to contribute to this community has passed. RIP Richard, your wit, knowledge, and advice will be missed. It now becomes the duty of the rest of us to share...

I have several AR-15's in 5.56 and I am looking to build a .300 AAC Blackout soon. I am just wondering when an adjustable gas block would be required? Is it only required for when you are considering shooting with a suppressor or for sub-sonic rounds? Can any one add input /clarify? I was...

Can anyone offer advice I am looking to drill and tape a ATI scope mount to a Mosin Nagant 1891/30? How deep do you drill the holes? I have not yet gotten the kit yet so I am in the information gathering phase.

I recently got a 1903A3 and I purchased a new scant stock set(keeping original of course) from Boyds and I wanted some help on how I should finish the stock? I was thinking Gun Stock stain and then several coats of boiled linseed oil? Can I get some suggestions from others who have done similar?

I am asking other Jericho owners for their particular input. As I said I have the manuals what I am asking for is people who have real world experience to share that knowledge, but thanks for telling me to read my books, would have never thought of that!

I just recently got a 9mm Jericho 941. I am looking to shoot 115 grn Jacket Hollow Point and Round Nose bullets with unique. Does anyone have a favorite load they use? Should I be considering a different powder choice? A different bullet weight? Obviously I have loading manuals, I am just...

By the way that is a nice looking firearm! One question I have always had regarding tax stamp items is for the above is do you build upper/lower then send in for stamp, or can you only build the lower till you get a stamp? How exactly does that work?

This will be a dedicated 9mm upper/lower. I will look at the Hahn top loader thanks!

@Dogmush, thank you for the well informed reply I will start looking for the parts and may hit you up for opinions/recommendations if I get stick or unsure what product to go with. Which mag well do you recommend top/botoom loading and brand? Thanks a lot! Sean

So I have a lower and upper all set to go with a lower parts kit, upper, standard at upper parts kit. No bolt, barrel, gas system. What parts would I need to get for a 16" barrel carbine system? First I need a 9mm chambered barrel with barrel extension(suggestions for all listed?), a 9mm AR...

I am looking to get 2 m4 profile barrels. I am doing two builds as gifts for my brother and father. These would just be general builds to put holes in paper and general home defence. I wanted to only spend 150 or so on each.