I recently picked up a used Beretta 1201FP, with the 20" barrel/rifle sights/standard rifle stock. Shooting birdshot wasn't too bad, but shooting slugs from the bench to test for accuracy really beat me up. It made shooting more pain than fun. I hate to sound like a wuss, but I've shot the...
The cylinder gap on my Security Six is .008"....a little more than I care to have.
Is it possible to narrow the gap by placing a SS shim (similar to an endshake bushing) in between where the crane (forward of the cylinder latch plunger) abuts the frame just above and ahead of the trigger...
I'm thinking about getting a Marlin 1894C in .357 mag and having the muzzle threaded 1/2x28. How tough of a job is this? Is it doable by an average gunsmith?
I don't care about the front sight because I'll be using optics.
Any experience, tips, or thoughts appreciated.
I'm looking for an inexpensive break-open or bolt-action .357 mag rifle with a heavy barrel (preferrably). Does such an animal exist (don't really care for the Contenders/Encores)? Thanks.
I'm doing up a Douglas-barreled .44 Special bolt gun. My questions are as follows:
1) Is a 300 grain bullet at 1,000 feet per second doable using a .44 Spl case?
2) If 'yes' on question #1, what would be the fastest powder that I could use with the lowest charge weight to get me there...
I handled a P9S for the first time, and gave it a good inspection. I always read about how superior this pistol was and is, and how it rivals even the Sig 210 for precision/accuracy. I don't see how and here's why:
*Is this thing even rifled and have a twist? Dang, it almost looked like a...
I have been told by a not-so-reliable source that post ban AR15s (non threaded muzzle) are noticeably more accurate than preban AR15s that have threaded muzzles and flashhiders.
Is this true?
Also, how does the flash attenuation of a 16" barrel with an A2 flashhider compare to an...
I'm thinking of buying a CZ75B SA in .40S&W , but I'd like to hear some feedback from owners first...
1) How is the case support on these guns? 6 oclock position of chamber? Would anyone mind measuring the inside diameter of the chamber?
2) Do you get typical .40 precision, or is the...
I just picked up a used 700VS in .223 with the serial #C6886xxx (my guess is it was made in '97 or '98). The rifle is in great shape and the original owner said he has never had the stock off or messed with it other than shooting it.
That said, the barrel is NOT free floated. It has what...
I'm sure this has been discussed before, but my search skills are lacking.
I'm thinking of a 1 in 8" twist .223 AR bull barrel upper with a 18" tube for prairie doggin and target.
For those of you that have spent some time behind a chrono, what kind of velocity loss does the 18" AR15...
I'm sure this has been discussed before, but my search skills are lacking.
I'm thinking of a 1 in 8" twist .223 AR bull barrel upper with a 18" tube for prairie doggin and target.
For those of you that have spent some time behind a chrono, what kind of velocity loss does the 18" AR15...
For my first precision rifle set-up, I bought a Savage 10FP, a Bushnell Scopechief 4-14x50mm AO scope, Weaver 46 2 piece mounts, and Burris Signature Zee rings (with the polymer inserts). I loc-tited the whole shebang down and had great results, until...
My front bottom ring screw became...
I'm pretty new to the precision rifle shooting thang, so I've been going at it piecemeal as finances allow. I'm interested in one of the Redding "Bushing" size dies to go with the Forster Ultra Seater that I just got from Cabela's (but haven't used yet).
1) What's the difference between the...
I picked up my first precision bolt rifle, (gun snobs, don't laugh) a 10FP 24" .308 w/ Accutrigger.
I've recently read somewhere that neck sizing isn't the way to go for ultimate precision. I keep hearing about "bump" sizing using a FL size die.
Would someone be so kind as to describe (in...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.