Search results for query: *

Hi! Just looked in Quickload for a load with N135 powder and was suprised. Wen I reached 105% compressed load I was 3300 bar in pressure and low velocity, max for the caliber is 4050. Is it safe to load 105-110% compressed or should I change powder. The burning rate of this powder should be...

I guess you are right, its the matte finish. Thanks for the help. Another question. Can I use my express barrel on an older wingmaster? Ive heard the receivers are different on the older wingmasters.

Hi! The letters on the barrels of my express are worned out becouse of barrel swaps. I have a 26 and 20 inch barrel. Mine was bought as Express combo with these barrels. It has Laminate stock. When did remington begun with these laminate stocks on 870? Can i get info of when my 870 was made by...

Thank you. I was thinking it was about how much force i used with press, and then its impossible to use the same amount of force for every shell.

So i've been trying my die after polishing it first. I just dont get how I will be able to get the same neck tension every time?

Ok thanks. Yes I guess it might be tough to make the die right this way.

I wonder, if you want to shorten a caliber can it be done by running the reamer short and then to load just cut off the standard FL die with no need to order a custom die?

I like DBM flush. Like rem 700 factory dbm or kwik klip. What i really hate but still own myself is dbm like aics sticking out under.

Your dad was right. Speed is for drop and BC is for wind. A slow high bc bullet is going to hit were the crosshair is if you compensate the drop. A fast bullet with low bc is much much harder to compensate. You get less drop but the wind is moving the bullet.

I borrow the thread with a question. Do you consider 700P LTR to be higher quality than a standard 700? LTR have a more expensive stock than say sps, but is the action/barrel better made?

Ok thanks. Yes the right shellholder must be used I guess. I know that Redding 308w dies also is for .307R

Hi folk! I want to neck up a german 5,6x50 mag to 6mm/.243. I know there is 6mm dies for the rimmed version 5,6x50R - called: "6x50 Scheiring". Those dies makes the 5,6x50R into 6x50R cases. The 5,6x50 mag case is the twin to the 5,6x50R - now I wonder if I could use those dies? that would...

Dish detergent didnt really clean it off completly. I tried acetone and now its completly clean. Thanks

Hi! Having problem getting rid of that thin thin coating that Break Free CLP leaves on metal. The reason I ask is im going to paint it so I need a good cleaner. Acetone maybe?

Yes i've looked at the 08imp, i rather not use an improved case but its not off the table either.

I dont know 6,5x55 is probebly too big.

Yes I've been way out with 140-160 bullets :what: been reading alot now and there is no way, just like you said Gloob. I guess 7mm-08 is the nearest I will come. Found some interesting data on 7-30 waters ackey improved is a neat round but I want to take deer/elk sized game so I need alittle bit...

Ok i might been off regarding velocitys but what I ment was a 7mm caliber using fast powder. There are tons of nice 7mm caliber. 280 remington is my favourite! But all of them 280/284/7-08/7x57/7x64 work best with 24 inch or longer barrels and with slow powders. I was looking at how good the...

Hi! Looking at the .338-06 amazing effectivness and ability to work well with fast powders and short barrel I just thought it must be a way to do this with a 7mm. Im thinking of necking up a 6 or 6,5 caliber to 7mm and get velocitys around 2800-2900 with 140-160 grain bullets using a 20-22 inch...

Bummer! Ok thanks for providing the measure numbers.