Search results for query: *

I've seen a few T/C muzzle loaders in stores , but have seen very few of their bolt action guns in Nashville TN. Bass Pro Shops, Dicks, or Academy. What's the problem?

I get occasional light strikes with my T/C Venture rifle. I can take those lightly struck cartridges and load them into my m70 Winchester and they fire. I get more failures when using CCI and Winchester primers. Would Federal primers be any better? I use large rifle magnum primers. I would...

Ok, this will probably sound stupid, but how often should I run a lubed patch down the bore of my rifle when shooting? After each shot? Will the lube or lack thereof affect my groups?

I cannot get my BP rifle to group. How many shots should I take before swabbing the barrel? With what do I swab the barrel? Should I lube the barrel between shots? I shoot a .50 cal. inline muzzle loader using 209 primers, 2 50 gr. equivalent pellets and the bullet is a sabot 240 gr. all lead...

I recently purchased a T/C Venture rifle. In the instruction booklet that came with it, there were instructions that said not to use ammoniated ( products with ammonia) in the rifle. Can someone explain this to me? Most copper solvents contain some type of ammonia compound.

I tried to order a magazine for my .270 T/C venture rifle. I phoned T/C and was told they were back ordered and would not have any for a month or so. Can anyone suggest where I can get a magazine? I would appreciate any help.

Dick's recently had a sale on the T/C Venture in .270W for about 325$ after rebate. They guarantee 1in. at 100 yds. with premium ammo. It did that. With my reloads, it grouped 1/2in @ 100 and 1in @ 200- yds. This is the only rifle I've ever owned that I did not have to modify i.e. float the...

Please bestow your wisdom upon me. I am getting a new rifle and being a tightwad I will choose between two rifles which are the Mossberg 100ATF or the Savage Axis. Which would you choose and why. Thanks for your suggestions. It will be a .270W.

I have a model 12 Winchester with a cylinder bore barrel. Is it possible to put a choke of some type on it? Would appreciate any help.

I was going to ask about loading data for Barnes bullets, but I found what I needed to know.

I need to shim my scope. The rifle is a .243 and I cannot adjust the scope any lower. It shoots about 5 inches high at 100 yds. I would appreciate any suggestions.

I am loading for .243W using WW760 powder. I am currently using magnum primers. Would regular primers suffice? I recall reading somewhere that magnum primers should be used with the WW760 and the H414 which are the same powder.

What would be the results if one were to load .308 bullets in a SKS designed for .311 bullets? (7.62X39 cartridge?) Have any of you tried this?

I shoot a .270 Winchester. My scope is about 2.5 inches above the bore. The MV is about 3000fps with 130 gr. bullets. To have a 200yd zero, how high should I be at 100yds? The charts I have seen are for scopes mounted 1.5 inches. I would appreciate any info.