Search results for query: *

Ok here was the problem. I wanted to load some 45-70 rounds using IMR-4198 using 40 grains of powder and discovered the if used the double disk system with the largest disk which are 1.57 that gives me 3.14 cc of volume or 38.7 gr. So I decided to try adding a 3rd disk and had to modify one set...

Now as strange as this is I find little information on the 124 gr 9mm FMJ bullet load data. I have some Precision Delta bullets but Lee, Lyman doesn't have any powders listed for a 124 gr FMJ bullet. The powders I have are Unique, Universal, Clays, HP-38, Titegroup and Bullseye. Now I email...

Ok what I have are some Ranch Dog TLC454-290-RF molded bullets with the GC. Now I looked over his loading tips and see he calls for a load of Lil'Gun of 25.5 gr while in another spot he shows a maximum of 24 gr of Lil'Gun. I'm looking for a minimum load for Lil'Gun with the 290 gr .454...

Oh I'm looking at getting the RCBS Cowboy die for Magtech brass 12 ga shot shells. Now the die needs a 1-1/4" x 12 tread in the press. RCBS Rock Chucker will use it but my Lee won't since the tread in the press is 1-5/64"-16 TPI Thread. My other possible option is the Hornady Lock-N-Load Classic...

I have 500 of these http://www.friendswoodbullet.com/9mm...76_306869.aspx and the only bullet I can find that matches it is the Speer 4602 which I found in an older book I have. Now I loaded a few up to test out with BP-38 but not sure of what the O.A.L. should be since the older book calls for...

I have a lee single stage press and looking for shell plate to hold brass a depriming die that will fit my brass shot shells. I use the 12 ga shot shells for black powder cowboy action shooting and now doing it all using the old discontinued Lee Loader hand set. Thanks for any size information...