Search results for query: *

I have been trying to get to RMR to take advantage of the specials, does anyone know if the site is down? leftytsgc

I am planning on reloading for a 6.5grendal AR style rifle, I have Norma 120gr 6.5mm .264 bullets, i am using CCI .41primers, am using XBR8208 powder, i can find load data for this Norma bullet, with a oal of 2.230 but not with XBR8208, based on other 6.5 loads i am estimating 26gr load based on...

I have some wear on my cylinder on my 1873 .45LC SAA. Is setting the timing something i can do myself? I have replaced springs and parts on my own before but never messed with the timing. Looking to see if i can tackle it or should I take it to a gunsmith. Are there any videos or such available...

I have Alliant RL15 Powder hat i am currently using for a 130gn Bullet for my 270Win. I am looking to see if anyone has worked a load for a 150gn Bullet using RL15. I contacted Alliant and they have no data for a 150gn bullet for RL15. They didnt say i cant use it but they cannot provide...

All, Back in 2014 THR had a strong PIF forum and RCMODEL held a drawing for those of us that were big into PIF. I happen to get fortunate and was selected for the RCMODEL LEE classic press. (picture attached). Well we no longer have the PIF forum as before, and I want to pass on the LEE press...

Does anyone know if the Dillon Forum is gone? I know i have not been on the Dillon website in a while, but i cannot find the Forum. LeftyTSGC

Was able to get to the range today to test my reloads using Bullseye. Posted this the other day: "I loaded up some 9mm to test using Bullseye Powder in my JRC Carbine. I have been using BE-86, while a great powder, it burns slow and causes a lot of soot in the JRC due to operating as a...

I have a 1939 Tula 91/30 Mosin Nagant, and I currently use a Brass Stacker mount with a very low cost AIM Scout Scope, 2-7 x 42. While it is good for up to 50 yds. I am looking for a recommendation to replace it with something at least a 3-9 x 40, would prefer x12 power, but requires at least...

I would like to know if anyone else has had an issue with the diameter of the Xtreme 124gr FMJ bullets? I use Xtreme 124gr HP for target practice and have reloaded thousands of them with no issue. I recently bought 1k of their new 124gr FMJ. I reloaded them and did not immediately have any...

Has anyone tried the Xtreme 124gn RN FMJ bullets yet? I just ordered some and was wondering what others are doing with them as to what powder OAL most are using. I plan to use BE-86 with an OAL of 1.160. Will work up a load. LeftyTSGC

I will be in Tucson AZ for the next three days. Any good reloading places to visit. LeftyTSGC

After some research I found that my best choices to reload for 7.62x54r in my Mosin Nagant is to use one of these powders: Reloader 15, Varget and H4895. Any comments on using one over the other, experiences of use, any peculiar things to know about each? I plan on loading one of the...

I have about 200rds of Milsurp 7.62x54r silver tip ammo that I am wanting to pull. I started to reload for this round, so I am looking at pulling these and re-using the bullets and powder. I do plan on measuring the loads of the milsurp to see how much powder is currently in them and...

I received my Mosin Nagant from my son a couple of years back as a Birthday present. I shot it a couple of times and was thinking that is was worn out. It is a 1938 Tula, I was getting lousy shot groups at 50 and 100yds with my Mosin. I tried Milsurp, Factory and reloaded ammo, and still was not...

What is the difference between the two powders? Is there a difference?:confused: I plan on reloading for my Mosin Nagant, 91/30 7.62x54r using Sierra 150gn Pro Hunters bullets. Mostly for plinking. Would Varget or Reloader 15 be better? thanks, LeftyTSGC

I have a lee pacesetter die set for 7.62 x 54r, and a RCBS Neck sizing die for the same caliber. The Lee set only came with a .308 expander. The RCBS came with both the .308 and .311 (.310) expander. My question is, what should I measure inside the case neck after using the .311 expander? I...

Yes, i am asking about using Trail boss with reloading for my Mosin Nagant for plinking out to 100yds.:eek: Has anyone tried Trail Boss with 7.62x54R. I plan on using PPV Brass, WLR, and Sierra 150 or 180 SP bullets (or any good 150-180gn bullet). I want a low recoil practice bullet out to...

Trying to figure out what caused this isse; see pics below. I am shooting a STAR 30M 9mm it has a 4.3in barrel. At the range today I was Chrono graphing some reloads, got done and just started to plink. I noticed that one or two per ten shots was causing a FTE, I was wondering if my...

I am looking for information to reload 7.62 x 54R for my Mosin Nagant. Primarily for range practice, maybe a few hunting rounds. Can someone tell me what Cal. bullets are best and where can I find them to purchase? Asking because I have seen some threads of people discussing anywhere from...

Just thought I would pass on that Remington now has the revamped R51 9mm and the RM380 listed on their website. http://remingtonhandguns.com/ Lefty:eek: