Search results for query: *

I;m loading Nosler 185 gr jhp 45 acp using VV N-320 powder. Going for the marine load of 4.1 grs. Can't find the oal any where, looked at 3 different load sites. If any of you happen to know, please let me know. I would really appreicate it. Thanks, k&j 223

I have purchased some nosler 115 jhp 9mm bullets & need some load data useing VV N320 Powder. For just practice & shooting at the range. I ck'd @ the VV reloading site & they didn't list anything for nosler 115 jhp. If any of you have any loads I would appreciate your input. Include your O.A.L...

Need reloading info for 9 mm 135 gr. RNFP, i am using x-treme bullets. Can't find any info on this bullet so if any of you guys can help i would appreciate it. Thanks k&j 223

I would like to know if its safe to use lead bullets in my sig P-250 ,45acp for practice. I was thinking of using Silver State 200 gr. fbswc bullets. I would like to use VVN310 powder. Rem # 2 1/2 primer WW once fired brass. I'm thinking of apx 4.0 grs. Taper crimp @.469. Thanks for any answers...

Its been said that it go's like this , Winchester, cci, federal. Ign energy most consistent being the cci. I wonder where the remington primers fit into the formula? Any thoughts guy's on this question ! This is of course is speaking for the 45 ACP Only. Thanks k&j 223;) ,

Need load data for 9mm 124 gr GS & 185 gr 45 acp GS bullets . Can't find any load data per these bullets. I would really appreciate any help. I'm Using short barrel sigs. Come on fellas please give me some help. Would like a low flash powder for use. Thanks, k&j 223

Would like to hear from anyone that has used the IOSSO liquid brass cleaner system. Also does it weaken brass? I've been told that you simply put your brass into a bag & set the bag into the brass cleaner for a few minutes & presto , its clean inside & out. Then rinse & let dry. Sure sounds...

what is the proper taper crimp dia. at case mouth on 9mm using hornady 124 xtp hp bullet? after seating bullet the case mouth measures .380 i checked a factory rd. and it measured .375 oal is 1.060 got that from hornady they didn't give me any info on taper crimp dia. i used a slight 1/64 bell...

Anyone here heard of a new bill that the IRS requires you to list all your guns on your IRS return as of 2010 & then pay 50.00 for each gun , that is if they allow you to keep them. If you don't comply then its off to the big house. My source tells me this bill has already passed & is now the...

Thought I would let you know I just received my order from Sinclar Int. I only put my order in 2 wks ago. The man I spoke with [bill] said he thought it would take apx 2 wks, boy he was right on . I had heard they were a great co. to do business with, now I know for sure. They keep their word &...

I would appreciate any input on Seller & Bellot S/R primers. I'm told by the seller that they are supposed to be great primers. I'm sure some of you have tried them. Loading for 223 rem rifle. Thanks , Ken

Need input on PMC SR MAG primers. Are these new? I know they are made in korea. I used some of there ammo many yrs ago & didn't like it. Wanting to load up some 223 & use these primers. Haven't bought them yet. They want 34.00 K, Price seems ok. just not sure how good they are, or even if they...

I think this message to reloader's is very important about RCBS products. I've been around reloading for many years, I haven't really given much thought to repairs or replacement parts for my equip. After apx 37 yrs. I noticed I was having problem's with my rockchucker press that I purchased 37...

I would like to ask the pro's, which single stage press is best for 223 rem? I have an old rockchucker I bought in 1970 & have loaded a ton of bullets , different calibers on it - mostly 38 & 45acp. Quite a few rifle rds.as well. Now I'm having a real hard time in priming 223 cases , they are...

HELP!!!!! A gun shop sold me Rem # 6 1/2 small rifle primers for reloading 223 rem , I told him that is what I'm loading for. He said you need # 6 1/2 rem After buying them & looking up some load specs for 223 rem I find that 223 rem calls for 7 1/2 rem primers, my question is , does...

I was wondering if someone could give me some tips on vihtavouri n-133,Loading for 223 rem, w/hornady's 50 gr v-max & hornady's 55 gr v-max. I am using miltary brass. I just need something in the mid range. Thanks Ken