Search results for query: *

I've been reloading for a while but not in the last year or so. I set up my press for .223 using RCBS dies I had previously used without issue. I've got some processed brass from sharch and some unprocessed from who knows where, probably Wideners. The processed brass chambers in my AR but the...

I just received a Spikes Gen ll billet lower, also known as the compressor. It's milled out to accept the KNS anti-rotation pins. I'm putting in a Geiselle SSA trigger and what do I find out? Geiselle says don't use the KNS pins on any of their triggers. Crap.

I just bought a Savage TR2 .22 and on the stock is a sticker that talks about their accu-trigger. Of course they didn't use a glue that allows for easy peeling and I can't get the darn thing to come off. It's a composite stock with a digital camo pattern and I don't know if a product like "goof...

I've been reloading 5.56 for 7-8 years now and up till recently it's gone well. But now I can't get my recent reloads to chamber in any of my 5 AR's. The bolt won't close all the way and the rifle locks up to the point that I have to mortar it to get the cartridge out. It doesn't happen every...

Will a 12" rail completely cover a low profile gas block on an 18" barrel with a rifle length gas system?

Of the powders listed in my Hornady manual I have Power Pistol and HS6. Either one of these better than the other for this bullet? thanks

I have this barrel nut http://www.bravocompanyusa.com/Barrel-Nut-AR15-p/barrel%20nut%20ar15.htm And this rail https://troyind.com/products/mrf-10-fde When I test fitted the nut to the rail prior to installing the nut it looked good. But now with the nut in place the rail won't slide in far...

I' just starting to get into building my own AR's and have been looking at different bcg's. Aim surplus sells a nickel boron bcg for just at $100. Everybody else seems to want 175-220. Is the Aim bcg made differently or are the other manufacturers gouging on price?

I put in my first order with them a couple of weeks ago and as I started using the .38spl ppc#2 bullets I noticed that several of them had no lube. Called the company to ask if this was normal and they said no it wasn't but they'd take care of. Today I came home from work and found a package on...

I'm loading with these bullets for the first time. My manual states an OAL of 1.18. This puts the top of the bullet almost flush with the case mouth. I'm assuming that is the way it's supposed to look?

I'm putting together a rifle for the first time and I ordered my stock from CTD and my buffer tube from Midway. Which one is supposed to have the castle nut? Neither include one. Or is it a separate purchase?

Is Bullseye a decent powder in .44 and .357/.38spl? I see recipes for it in the manuals. I have 8lbs I need to find a use for. Thanks

I have a Hornady case activated powder drop and it doesn't come with a baffle and I can't find one anywhere. I've been using the one from my RCBS measure but it's a little too small. Does anybody make one for the Hornady? ETA I am not interested in making one.

I'm looking for 1000 pieces of 10mm brass and buying directly from Starline seems the cheapest route. Problem is I have never used their brass before. Is it good to go? Thanks

A few years ago there was a guy on the internet selling once fired .45acp cases for dirt cheap so I bought a 1000. Now I realize why they were so cheap. Nearly half of them are Federal NT (Non toxic) cases that use a small primer instead of the normal large primer. They are also crimped. The...

I purchased my first plastic gun, an XD 45. Is there anything special to watch out for when cleaning? Specifically, can you use regular solvents or not?

Had some given to me by a friend but have no idea what loads it is good for. I shoot mainly AR15, Garand and M1A. I have read it is too slow for Garands but how about the others? Thanks

This is a new caliber for me and decided to give RCBS dies a try (have been using Lee and Hornady). I have the sizing die adjusted according to instructions on my Hornady LnL AP and I am having to use way too much force to get the die all the way down. It gets to about 1/2" from the base fairly...

Anybody use one of these? I bought the trimmer and the base from Midway yet there was no hardware by which you could attach the trimmer to the base. Any ideas on how I can get this done? thanks

I have a Ruger Blackhawk in .357/.38 spl and my hands are just to big to fire this thing comfortably. It's the only wheelgun I own and I don't shoot it much but I'm not really interested in selling it so what are some suggestions for replacement grips? Thanks