Search results for query: *

yessir.

I took off the trigger plate and had a lookat the action inside. the trigger reset is mechanical, not inertial. there was a trigger tension spring on each side of the trigger and only one of the two springs was engaged. this caused the trigger to wobble and i think this is why the second trigger...

owen, i tried that yesterday, and the second one didn't go off. maybe i didn't whack hard enough. anyway, it's probably time for a trip to the gunsmith if that doesn't work.

I'll look into removing the stock. is there any way to tell whether the trigger is set by inertia or mechanically set? when i dry-fire, the first hammer drops, but the second one generally does not (can't remember the last time it did). this makes it sound like an inertia trigger.

would the cleaning you describe require some more-than-basic knowledge of gunsmithing? i can find diagrams of the action, but i'm wary of taking it apart...i'm afraid i won't be able to put it back together!

Hello again, I have an old (1930s, based on serial number) 12ga western arms (ithaca) "long range" single-trigger side-by-side shotgun that has a funny habit of not discharging the second shot consistently. The first shot always goes off, but about half the time, the second trigger pull is a...

ok, i'll try chambering more aggressively with the universals i have left and see if it's any better. so, goaded on by the replies in this thread, i finally got a bore brush and man, was the bore filthy! can't wait to shoot it now. hopefully the new combination of cleaner gun + better ammo...

I ended up taking the action apart and cleaning it last night. it wasn't all that dirty, actually! but I'll go buy a bore brush tonight. I wasn't even aware that winchester universals were cruddy ammo. The logo is pretty sleek, which is probably why I bought the shells in the first place. so...

I was using mostly winchester universals indeed, but it happened with most of the few winchester super-x shells I tried, too. crap! I have so many winchester universals left! obviously crud in the chamber would contribute to this problem, but i don't want to take this darn thing apart to...

Hello everyone, I have recently been having an issue with my JC Higgins Model 20. The slide racks front and back just fine without a shell in the chamber. It also racks and ejects without any issues if I load shells and don't discharge the gun. However, if I DO fire a round, the slide is...

way to go frankie for representing rocks :)

thank you for the helpful tips! my target load is 200 gr lswc on top of 4.0 gr bullseye, a very comfortable recipe i got after reading many, many posts on various sites on the web. i will try some 230 gr bullets as you suggest once i get my hands on some. over at m1911.org many RIA owners...

I'm planning on filing down the front sight on my RIA tactical, which is shooting low even with a center-of-mass sight picture (let alone a 6-o'clock sight picture). As I venture forth, should I be sighting with center-of-mass or with the 6-o'clock hold? I have read several articles and threads...

the lee DOES have a magnetic damper. occasionally the blade on the end of my beam will stick to the magnetic damper behind it, locking it from moving freely--perhaps this is what bear was experiencing?

used sig p6, p225, or p228

sweet, MR makes a 1911???

because i couldn't find any .45 acp, and when i could, it cost too much... this thread got me excited so i just reloaded another 50 rounds! haha

thank you for the informative replies! juk, of course i have perused the czusa website. otherwise i wouldn't have brought this up for your consideration! :) glad to hear the european stocks are at least tolerable. the european stock i handled actually seemed like it was a good fit--the drop at...

I was in the local gun shop and asked to see a CZ 452. They didn't have CZ 452 in stock, but they DID have what was labeled on the store tag as the CZ 452 E. It had a European-style stock, and I think it was beechwood. What's the difference between the CZ 452 and the CZ 452 E? Is the CZ 452 E...

Problem: supplied spring for autodisk powder measure is too stiff, hence increasing the likelihood of breaking the brass chain. Solution: instead, use the spring from any retractable pen; these springs are much lighter but still get the job done. make sure the new spring is at near-full...