147gr

  1. G

    BE-86 9mm 147gr Load Data?

    I’m new to 9mm, but now have various pistols and PCCs. After years away from reloading, I have an inventory of 147gr. Sig V-Crown JHP, Zero FMJ and Missouri Bullet Company Coated subsonic FN. I decided to start with one powder and picked up some BE-86 and have Winchester WSP primers. This...
  2. J

    .300 Blackout Recipes147gr FMJ Surplus

    Hi everyone, I am looking to reload a bunch (500 or so) 147gr FMJ projectiles for my .300 Blackout stash. I have maybe only a few hundred rounds for it I bought and it's all for hunting. I have no real "bulk" or training ammo as it stands. I have a case gauge on the way for better safety...
  3. 748

    Buy +P brass for 147gr 9mm carbine subsonic loads

    I would like to work up a load 9x19mm 147gr xtp with either HS-6 or AA7, kept subsonic in a carbine specifically for coyote assassination. Do I need +P brass to get the projectile moving around 1,050 to 1,100 fps or no? I was going to buy some 147gr +P to see if it was super sonic but at $30 for...
  4. MCMXI

    9mm 147gr subsonic handloads vs. factory ammuniton

    I recently returned an MPX to SIG to have them figure out why it would throw bullets all over the place at 50 yards. It runs very well but the accuracy/precision has been frustrating to say the least. I tried suppressed and unsuppressed, two different optics, iron sights and at least four...
  5. Chuck R.

    CZ 75 9mm and 147 Grainers

    I'm attempting to load 147s for my new CZ75 "Accu-Shadow" Lite from CZ Custom and running into issues due to the short throat. Prior to this my shortest throated pistol was my Walther PPQs and I've managed to make several ogive profiles work. The new CZ though is a PITA as I have to seat short...
  6. H

    9mm Score - well maybe, sorta

    I recently bought a large quantity of pulled 9mm jacketed (not plated) bullets. It includes all sorts of weights and all sorts of configurations. A statistically valid sample was measured with a micrometer and found all sample units to be 0.3550 to 0.3552 in diameter. I plan on treating all...
  7. P

    Help with 9mm 147gr LC (Molly) with Bullseye Load data

    Ok I am going to start off by saying I am new to loading handgun ammunition and just got a XL650. I am taking it slow and trying to be cautious but since the powder I ordered is backordered I went down to the local Gander mountain to pick up some primers and powder. I asked for their...
Back
Top