neck tension

Been working on some 30-30 loads. Got them down to about 1 moa with rcbs 2 FL die set I bought used 20 years ago. The next logical step is get a bushing neck sizing die or collet die. My problem now is most of the brass I have is remington. The problem with remington brass is I get a variance of...

Hello All, I know this question may have been asked before in past threads (and I spent the last hour reading them) but nothing seems to have addressed my issue. I’ve also been loading for 6+ years without any issue like this. A bit of background specs before I begin: Press-LNL AP Sizing...

Hi, I was wandering if anyone has sugested using a bushing die for better neck tension on fc ae 168 gr otm cases when seating bullets for use in a scar 17? Not sure if its needed but i did read where someone did ask sierra about crimping bullets and they said something like no crimp needed just...

Hello all, I'm new here, and new to reloading so advice would be most appreciated. I recently started reloading for my A.R. 15 and after some research, and some suggestions people are saying do not crimp for best accuracy but rely on the proper neck tension contacting the bullet. High power and...