ram

I recently pitched the Lee Ram Swage primarily for .308 and .223 reloading. I set the swage up for .308. I sized and deprimed my brass. When I use the swage it bends my case mouth inwards a significant amount causing me to have to re-size all the brass. Additionally, on cases with a significant...

I just acquired a very used Lee Pro 1000 press. The press drops/clanks when the ram goes down. This is causing havoc with case-to-plate alignment, spilled powder, etc. As you can see in the videos, the ram drops/clanks about 1/4". The action is not smooth. The ram linkage has a some slop to...