speer

I am finally going to get started loading for my .280ai (Kimber Hunter). I have ELD-X (forgot the weight), 120 gr and 140 gr TTSX, and 145 gr and 160 gr Hot-Cor. The 145 gr Hot-Cor is the bullet that I have the most of (200), so I thought I'd get started there. Also, no reason to burn through...

Hi all, I've recently bought some 150 gr Speer soft points (btsp) because I couldn't find any 150 sst or 150 accubonds at my local gun stores. That being said,the 150 sst and 150 accubonds shoot 0.746 - 0.789" groups all the time in my 308 SAKO. As the heading states,the 150 gr Speer does not...

What's up with this? Can't find it anywhere... Settled for Hornady 125gr defense loads, but... What's up with the Speer short barrel? The ultimate load for short barrel 357s. I hope they start making it again, probably after they do all the government contracts... Has anyone heard anything...

So I am starting to run a little low on 9mm bullets. My favorite bullet is the Speer 9mm 124 gr. TMJ (Speer part number 3993), as that is what I have been loading for a few years now with good results. Not surprisingly, all the retailers that usually stock them are out. Has anyone seen these in...

Hi all, I have been trying to work up a load for the 75 grain speer gold dot bullets, and am now trying five different powders to see which works the best. They are: Varget, H335, Power Pro 2000MR, N140, and CFE 223. The problem is, the Lee reloading manual recommends different max loads than...

I will make this short and sweet. According to Redding their universal decapper doesn't have replaceable pins but all of their rifle dies have the small pin. So I have a Redding Reloading Type S Full Length Sizing Die in 308 Winchester, #77155; and after looking at it I confirmed the...